Loading ...
Loading ...
Loading ...
English
Operations
English34
04 Time / * Wrinkle
Prevent
Press to adjust the drying time for the Manual Dry cycles. This is not
available with the Sensor Dry cycles because the dryer determines the
drying time by sensing the current moisture level of the load.
* Wrinkle Prevent provides approximately 180 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce wrinkling. Press
and hold Time to activate this feature. The load is dry, and can be removed at
any time during the Wrinkle Prevent cycle.
05 Digital Graphic
Display
Displays all cycle information, including the cycle time, information code,
and operating status.
06 POWER Press to turn on/turn off the dryer.
07 START/PAUSE Press to start or stop operation.
NOTE
Do not take extremely tangled items from your washer and put them into the dryer. They can degrade the
drying efficiency of the dryer or cause the door to open. We recommend that you untangle the items before
putting them into the dryer. Also, do not put objects on the dryer, especially on the control panel.
Icon description
Sensor Dry
This icon appears when the dryer operates the cycle which senses the
internal humidity to determine the drying time.
Filter Check
This icon displays after every load as a reminder to clean the lint
filter. Clean the lint filter before every cycle and make sure the filter is
properly inserted before starting a cycle.
Child Lock
This icon indicates that Child Lock is on. For more information on Child
Lock, see page 38.
Simple steps to start
1. Press POWER to turn the dryer on.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dryness, Temp., and Time) as necessary.
4. Select desired options as necessary.
5. Press and hold START/PAUSE.
To change the cycle during operation
1. Press START/PAUSE to stop operation.
2. Select a different cycle, and repeat steps 2-4 above if necessary.
3. Press and hold START/PAUSE again to start the new cycle.
Untitled-1 34 2022-06-14 10:23:13
Loading ...
Loading ...
Loading ...