Loading ...
Loading ...
Loading ...
Swapping Your Home Time
and World Time
In the World Time mode, press (A) and (B) at
the same time to swap your Home City time
with your World Time.
After swappingBefore swapping
World Time
Home Time
World Time
Home Time
Stopwatch
Measure up to 59 minutes, 59.99 seconds of
elapsed time in units of 1/100 of a second.
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
1/100 seconds
Minutes, seconds
2. Use the operations below to measure
elapsed time.
D
D
D
D
Stop
Resume
Stop
Start
3. Press (A) to reset the stopwatch to all
zeros.
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
1/100 seconds
Minutes, seconds
2. Use the operations below to measure
elapsed time.
●
Pressing (A) displays the elapsed time
from the start of a race up to the point
when you pressed the button (split
time).
D
A
A
D
Stop
Split release
Split
Start
3. Press (A) to reset the stopwatch to all
zeros.
Timing the First and Second
Place Finishers
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
1/100 seconds
Minutes, seconds
2. Use the operations below to measure
elapsed time.
D
A
D
2nd Finisher*
1st Finisher*
Start
* Displays the time of the first finisher.
3. Press (A) to display the time of the second
place finisher.
4. Press (A) to reset the stopwatch to all
zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper is muted when battery power is
low.
Setting the Countdown Start
Time
The start time can be set in 1-second units up
to 100 minutes.
●
If a timer countdown operation is in
progress, reset the timer to its current start
time before performing this operation.
l
Using the Timer
1. Enter the Countdown Timer Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when the minutes
setting starts to flash.
Minutes
3. Use (B) and (D) to change the minutes
setting.
4. Press (C).
This causes the seconds digits to flash.
Seconds
5. Use (B) and (D) to change the seconds
setting.
6. Press (A) to complete the setting
operation.
Watch Operation Guide 5550
11
Loading ...
Loading ...
Loading ...