Loading ...
Loading ...
Loading ...
30 GETTING TO KNOW YOUR VEHICLE
If the HI level setting is selected, the system will
automatically switch to LO level after approximately
60 minutes of continuous operation. At that time, the
display will change from HI to LO, indicating the change.
The LO level setting will turn off automatically after
approximately 45 minutes.
NOTE:
The engine must be running for the heated seats to
operate.
For information on use with the Remote Start system, see
Ú page 18.
Rear Heated Seats
On some models, the two outboard rear seats
are equipped with heated seats. The heated
seat switches for these seats are located on
the rear of the center console.
There are two heated seat switches that allow the rear
passengers to operate the seats independently. Indicator
lights in each switch indicate the level of heat in use.
Two indicator lights will illuminate for HI, one for LO and
none for off.
Push the heated seat button once to turn the HI setting on.
Push the heated seat button a second time to turn the
LO setting on.
Push the heated seat button a third time to turn the
heating elements off.
NOTE:
The level of heat selected will stay on until the operator
changes it.
FRONT VENTILATED SEATS —
I
F EQUIPPED
Located in the seat cushion and seat back are
fans that draw the air from the passenger
compartment and move air through fine
perforations in the seat cover to help keep the
driver and front passenger cooler in higher ambient
temperatures. The fans operate at two speeds, HI and LO.
The front ventilated seats control buttons are located
within the Uconnect system. You can gain access to the
control buttons through the climate screen or the controls
screen.
Press the ventilated seat button once to choose HI.
Press the ventilated seat button a second time to
choose LO.
Press the ventilated seat button a third time to turn the
ventilated seat off.
NOTE:
The engine must be running for the ventilated seats to
operate.
For information on use with the Remote Start system, see
Ú page 18.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury by
restricting head movement in the event of a rear impact.
Head restraints should be adjusted so that the top of the
head restraint is located above the top of your ear.
NOTE:
Do not reverse the head restraints (making the rear of the
head restraint face forward) in an attempt to gain addi-
tional clearance to the back of your head.
WARNING!
All occupants, including the driver, should not
operate a vehicle or sit in a vehicle’s seat until the
head restraints are placed in their proper positions in
order to minimize the risk of neck injury in the event
of a crash.
Head restraints should never be adjusted while
the vehicle is in motion. Driving a vehicle with the
head restraints improperly adjusted or removed
could cause serious injury or death in the event
of a collision.
23_MP_OM_EN_USC_t.book Page 30
Loading ...
Loading ...
Loading ...