Loading ...
Loading ...
Loading ...
260 SERVICING AND MAINTENANCE
Reverse Side of Tail Lamp
6. Insert the new bulb, making sure it is properly locked.
7. Reposition the rear body side lamp assembly on
the car.
8. Reconnect the electrical connector.
9. Reinstall the body side lamp making sure to align the
ball studs.
Body Side Tail Lamp
10. Install fasteners and tighten body side lamp
assembly.
11. Finally close the tailgate.
Reverse Lamps
1. Open the liftgate.
2. Using a suitable tool remove the access panel for
body side lamps, remove liftgate access cover for
liftgate lamps.
Liftgate
3. Disconnect the electrical connector by pushing the
release.
4. Remove bulb and replace making sure it is properly
locked.
5. Reconnect the electrical connector.
6. Reinstall the access panels making sure they are
locked in correctly.
7. Finally close the liftgate.
NOTE:
Refer to an authorized dealer for service.
1 — Direction Indicator Bulb / Stop Lamp Bulb
2 — Electrical Connector
3 — Ball Studs
1 — Rear Body Side Tail Lamp
2 — Ball Stud
1 — Liftgate Access Covers
23_MP_OM_EN_USC_t.book Page 260
Loading ...
Loading ...
Loading ...