Loading ...
Loading ...
Loading ...
6
ASSEMBLY INSTRUCTIONS
6.
5a.
Remove wire connectors from WHITE and BLUE (or
BLACK) wires labeled FOR LIGHT in switch
housing. Connect WHITE wire from light kit fitter (A)
to WHITE wire from fan. Connect BLACK wire from
light kit fitter (A) to BLUE (or BLACK) wire from fan.
Use wire connectors that were previously removed
to make the connections.
WARNING: To reduce the risk of fire, electrical
shock, or personal injury, each wire connector used
with this light kit should accept only one 18-gauge
wire from the light kit and one 18-gauge wire from
the ceiling fan. If there are three or more wires to
connect or any of the wires is larger than 18-gauge,
consult an electrician for the proper size wire
connectors to use.
NOTE: Screw wire connectors on in a clockwise
direction.
If applicable, re-connect male plug from motor
housing to female plug from switch housing. Be sure
that plugs connect securely.
5b.
BLUE
Female Plug
Male Plug
BLACK
WHITE WHITE
Wire
Connectors
BLUE (or BLACK)
BLACK
WHITE
WHITE
Switch
Housing
Cap
Wire
Connectors
Switch
Housing
Motor Housing
Motor
Housing
A
A
5a
5b
6
6
Wrap electrical tape (not included) around
each individual wire connector down to the
wire.
WARNING: Make sure no bare wire or
wire strands are visible after making
connections.
Loading ...
Loading ...
Loading ...