Loading ...
Loading ...
Loading ...
4.
ASSEMBLY INSTRUCTIONS
5
3.
2a.
Remove three switch housing screws and
lower switch housing from ceiling fan. [If fan
has a switch housing cap, proceed to 2b.]
If applicable, disconnect male plug from
motor housing and female plug from switch
housing. Remove switch housing from
switch housing plate.
Remove three switch housing screws at the
bottom of the switch housing and remove
the switch housing cap.
2a
2b
Switch Housing
Motor
Housing
Switch
Housing
Plate
Switch
Housing
Motor
Housing
Switch
Housing
Cap
2b.
Punch center cap out of switch housing
or switch housing cap with a screwdriver
(not included).
3
Center Cap
Switch
Housing
Center Cap
Switch
Housing
Cap
44a
Switch
Housing
Cap
Switch
Housing
4
Remove hex nut (B) and lock washer (C) from
threaded rod on light kit fitter (A). Gently feed
wires from light kit fitter (A) through hole in
middle of switch housing (see 4a) or switch
housing cap (see 4b) followed by lock washer
(C) and hex nut (B). Tighten hex nut (B) over
lock washer (C) for a secure fit.
B
C
A
A
B
C
OR
4b
Loading ...
Loading ...
Loading ...