Loading ...
Loading ...
Loading ...
5
to decrease desired temperature. This thermostat control dial can one or both of the (# 2 &
3) switches are in the “on” position. When the heater reaches the desired temperature, the
heater and one or both of the indicator lights will turn off.
2. ⅡHeat Switch
For high heat function - Press Ⅱswitch while the Flame effect switch (#4) and switch (#3)
are in the “on” position for high heat. The indicator light will turn on.
3. ⅠHeat Switch
For low heat function - Press Ⅰ switch while the Flame effect switch (# 4) is in the “on”
position for high heat. The indicator light will turn on.
4. Flame Effect:
Press Flame effect switch (#4) to the “on” position for flame effect. The indicator light will
turn on. This function can be used without heat.
5. Flame Dimmer Control:
Turn the dimmer dial (#5) clockwise or counter-clockwise to get the desired flame intensity.
The dimmer switch can only be used when the Flame effect switch is in the “on” position.
NOTE:
Heat functions will NOT operate unless the Flame effect switch (#4) is in the “on”
position.
MAINTENANCE
1.Glass Information
* Under no circumstances should this product be operated with missing or broken glass.
* Do not strike or slam the glass.
* Do not use abrasive cleaners to clean the glass.
* Replacement glass is available from the manufacturer and replacement should be carried
out by a qualified service person.
2. Cleaning
* To clean the unit, first turn off controls on unit and unplug unit from power source.
* To clean the glass door: remove dust with clean dry cloth or to remove finger prints and
other marks clean glass with clean damp cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.
* Metal and metal painted parts should be cleaned with clean damp cloth only. Do not use
abrasive cleaners or spray liquids on this surface.
TROUBLE SHOOTING
If the heater will not operate, please check the following before seeking repair of service:
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if electricity to the outlet is working.
Note: The heater may not be operating if the thermostat is set lower than the room
temperature. To begin operation, increase the thermostat temperature for a higher heat
setting.
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up,
use the original packaging to repack the unit.
Loading ...