Loading ...
Loading ...
Loading ...
Page 37
cleaning and adjustment
WARNING
! !
Spiders and small insects can spin webs and nest in the grill burner ventures which can
This type
of "FLASHBACK FIRE" can cause serious grill damage and create an unsafe operating
condition for the user.
To reduce the chance of FLASHBACK FIRE you must inspect and clean the ventures at
least twice a year in summer and fall or whenever spiders are active in your area, and if
your grill has not been used for an extended period of time.
Remove the pin from the rear of each Main Burner using needle-nose pliers. Carefully lift
each Burner up and away from the Gas V
enturi
Tubes for insects and insect nests. A
FOR CLEANING, REFER TO
METHODS 1-3 BELOW:
METHOD 1: Bend a stiff wire or wire
coat hanger into a small hook as shown
and run the hook through the Burner
Tube and inside the Burner several times
to remove debris.
METHOD 2: Use a bottle brush with a
the Burner Tube and inside the Burner
several times to remove any debris.
METHOD 3: Use an air hose to force air
through each Burner Tube. The forced
air should pass debris or obstructions
through the Burner and out the Ports.
Burner Holes Bracket
WARNING
! !
For safe operation ensure the Gas Valve Assembly
is inside the Burner Tube before using your
grill. (See above). If the is not inside
the Burner Tube, lighting the Burner may cause
explosion and/or resulting in serious bodily
injury and/or property damage.
Gas Venturi
To Clean Burner Tube,
Insert Hook Here
Loading ...
Loading ...
Loading ...