Loading ...
Loading ...
Loading ...
4
Using Your Dispenser:
1. Open the lid, then fill water into the tank. CAUTION: Do not overfill the product or operate
it when empty. Close the lid.
2. Set your water temperature by turning the temperature knob. Place a mug on the tray.
Press power button to turn ON. The power button will be red when water is heating.
When the power button turns green, the water is heated and will dispense in your mug.
3. Press the power button to stop dispensing water.
4. Repeat the above steps whenever you would like hot water.
Cleaning Your Kettle:
WARNING: Always unplug the product and allow it to cool before cleaning or storing.
NOTICE: To avoid damaging the product, do not pour cold water into the appliance after use
and do not use abrasive cleaners/pads to clean any part of the product.
WARNING: Do not place any part of the product in a dishwasher.
• Appliance should only be cleaned with a soft damp towel and dried before storing. DO
NOT USE RUNNING WATER. Water tank can be detached for cleaning.
• Dry all parts thoroughly before storing or using again.
• After cleaning the appliance, please open the drainage stopper in order to clean up waste
water, please tighten the drainage stopper after opening it.
• You can remove the spout (the spout is removable) to clean up scale deposit.
Note: If water leakage from the bottom is found, please tighten the drainage stopper.
Note: The appliance has a reset thermostat behind the body
to recover the heating function for abnormal operation, if the unit is has no power,
not working, not boiling the water, you can reset the thermostat by using the reset
key.
Drainage
Loading ...
Loading ...
Loading ...