Hikvision DS-2CD2H43G2-IZS User Manual

Loading ...

2.5.3 Set Smooth Streaming

It is a funcon to tackle the latency and network congeson caused by unstable network condion,

and keep the live view stream on the web browser or the client soware smooth.

Before You Start

Add the device to your client soware and select NPQ protocol in client soware before

conguring the smooth streaming funcon.

Be sure that the Bitrate Type is selected as Constant and the SVC is selected as OFF before

enabling the funcon. Go to Conguraon → Video/Audio → Video to set the parameters.

Steps

Go to the sengs page: Conguraon → Network → Advanced Sengs → Smooth Streaming .

Check Enable Smooth Streaming.

Select the mode for smooth streaming.

Auto The resoluon and bitrate are adjusted automacally and resoluon takes the

priority. The upper limits of these two parameters will not exceed the values

you set on Video page. Go to Conguraon → Video/Audio → Video , set the

Resoluon and Max. Bitrate before you enable smooth streaming funcon. In

this mode, the frame rate will be adjusted to the maximum value

automacally.

Resoluon

Priority

The resoluon stays the same as the set value on Video page, and the bitrate

will be adjusted automacally. Go to Conguraon → Video/Audio → Video ,

set the Max. Bitrate before you enable smooth streaming funcon. In this

mode, the framerate will be adjusted to the maximum value automacally.

Frame Rate

Priority

The image is sll smooth even under the poor network, while the image

quality may be not good.

Error

Correcon

The resoluon and bitrate stay the same as the set values on Video page. The

mode is used to correct the data error during transmission to ensure the

image quality. You can set the Error Correcon Proporon within range of

0-100.

When the proporon is 0, the data error will be corrected by data

retransmission. When the proporon is higher than 0, the error data will be

corrected via redundant data that is added to the stream and data

retransmission. The higher the value is, the more redundant date will be

generated, the more data error would be corrected, but the larger bandwidth

would be required. When the proporon is 100, the redundant data will be as

large as the original data, and the bandwidth is twice required.

Note

Be sure the bandwidth is sucient in the Error Correcon mode.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2H43G2-IZS AcuSense 4MP Outdoor Network Turret Camera with Night Vision