Loading ...
Loading ...
Loading ...
15EN
Check water Alert
When water tank is empty, the Ice maker
senses the lack of warm water feeding in,
and will turn o the ice maker.
This trigger will also displays the "Check
water alert". The intention is the alert user that Ice
maker has been turn o due to the lack of water.
The alert can be dismissed by turning on Ice maker.
If no water is detected again, ice maker will be turn
o again, and the check water alert turns on.
Error codes
Both Fridge & Freezer displays are used to
communicate problems by code.
When error codes are displayed in the numeric
display, the unit requires service attention.
"Er" shows up on Fridge display
Various error codes on Freezer display
Error code table
Communication error CE
FZ Cavity NTC T1
FZ Evaporator NTC T2
FF Cavity NTC T3
Third cavity NTC T5
FZ Ice maker NTC T8
4.2 Alert and Alarms
Door Alarm
When any of the door is left open for 2 minutes.
The alarm will sound, and all LEDs that are
currently on.
• The alarm is turned o by closing the door or
resetting the countdown by pressing any key on
the control panel.
High Temperature alert
In the event of high temperature condition, audio
alarm is played every 10 seconds until the alert is
acknowledged.
The alarm by pressing any key on the control panel.
Display and blink “HI” in the correspondent
compartment display, whichever is in the high
temperature condition.
ECO indicator
Eco mode indicator will light up
automatically to 100% when the
fridge and freezer compartments
are set within a temperature range.
Fridge range: 4°C to 7°C
Freezer range: -18°C to -14°C
Selecting any of these mode: Quick Freeze, Quick
Chill, Fast Ice or Drinks Chill will deactivate the Eco
mode, the Eco icon will fade.
Water Filter Alert and Reset
Water Filter alert warns user that the Water filter
have to be changed as soon as possible.
When water filter is used for 6 months or 120
gallons (about 454 litres) of water has been
dispensed since the last filter reset, LED "Replace"
will automatically illuminate.
Note:
1. Users could reset the filter when alert is not
visible. Play tone_Confirm once it is reset.
2. LED "Replace" remains visible during sleep mode,
except when door is closed
High Temp indicator
on Fridge display
High Temp indicator
on Freezer display
Loading ...
Loading ...
Loading ...