Loading ...
Loading ...
Loading ...
Appliance settings en
31
Q Appliance settings
Appliance settings
You can change the following settings:
■ The volume of the information
signals (e.g. at the end of the
programme) and/or
■ The volume of the button signals.
In order to change these settings, you
will need to activate the setting mode.
Activating the setting mode
1. Turn the programme selector to
position 1. The washing machine is
switched on.
2. Press the Start Reload A button
and, at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the programme).
Changing the volume
■ To change the volume of the
information signals, use the Ready
in button while the programme
selector remains at position 2.
■ To change the volume of the button
signals, rotate the programme
selector to position 3. Use the
Ready in button again to change the
volume.
Exiting setting mode
You can now end the process and set
the programme selector to the off
position. The settings are saved.
2 Cleaning and
maintenance
Cleaning and maintenance
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and disconnect
the mains plug.
:Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Prevent detergent residue from
building up and odours from forming
by following these instructions:
Notes
■ Ensure the room in which the
washing machine is set up is well
ventilated.
■ Leave the door and detergent
drawer open slightly when the
washing machine is not in use.
■ Occasionally run a wash using the
Cottons 60 °C programme with
washing powder.
1/2/3/4... positions on the
programme selector
‹ = off, ‚ = quiet,
ƒ = medium, „ = loud,
… = very loud
Loading ...
Loading ...
Loading ...