Loading ...
Loading ...
Loading ...
Battery Replacement
Note:
If the indicator on the remote
control doesn’t turn on any more,
please consider replacing the battery.
1
Press the locking button to pop
out the battery holder.
2
Replace with the same battery
type with the (+) side facing up.
3
Push in the holder until securely
locked into place.
Remote Control
Power
Power Indicator
Increase
Speed
Decrease
Speed
Vertical Oscillation
Mode
Timer
Horizontal
Oscillation
Additional Features
Memory
If the fan is turned OFF or disconnected from power,
it will operate under the previous settings (except the
Timer setting ) when it is turned ON again.
When the fan is ON/OFF, touch the timer button
repeatedly to set a timer from 1 to 8 hours. When
the timer ends, the fan will stop/start running
automatically. To cancel, set the time to 0 hour.
Note: When the auto off timer is enabled, display will return
Display will show 8 if the timer is beyond 8 hours. To set a
timer beyond 8 hours, please go to the Dreo app.
to fan speed after 3 seconds.
Timer
Display will show “ ” during the update process. Do
not operate until the update is completed.
Check the firmware version on the Dreo app and
update regularly for the air circulator to work more
efficiently.
Firmware Update
Display turns off after 1 minute (after 5 seconds in
sleep mode).
Wake up the display with any button.
To disable this feature, please go to the Dreo app.
Display Auto Off
12
11
Child Lock
Long press the Horizontal Oscillation button
and Vertical Oscillation button
3 seconds to turn on/off Child Lock.
at the same time for
Note: Child Lock doesn't apply to operations from the remote
control and the Dreo app.
You can also turn off Child Lock by re-plugging in, resetting to
factory settings, or through the Dreo app.
CR2025 3V
1
2
3
Loading ...
Loading ...
Loading ...