Loading ...
Loading ...
Loading ...
1
®
3. Connect your plasma cutting torch and ground cable to the front panel of the machine
(Figure1.5).
4. Attach the ground clamp to the metal work piece that you plan to cut. Make sure that
you cannot pull out the ground connection from the machine input. The metal work
piece should be securely attached.
5. Make sure the consumables are properly assembled on the torch head.
6. Press the trigger of the torch and make sure there is air flow through it.
7. Move the torch head to the work piece, press the trigger (for spacing from the work
piece, maintain a slight distance approx. 1 mm) and you will find that the torch will
ignite. Enjoy cutting!!
8. Change your consumables (tip, electrode, and cup) when they become worn out. The
correct consumable type for this machine is PCON20, PCON40, PCON90 etc. All
accessories and consumables can be purchased at www.uwelding.com or Lotos’s
authorized resellers.
Thank you for your business!
Figure 1.5
3-pin Switch
Plug
Air/Power
Output
Ground
Cable
2
Loading ...
Loading ...
Loading ...