Loading ...
Loading ...
®
Lotos Technology LTP5000D
Quick Setup
Instructions
Power plug wiring identification:
The GREEN wire with the yellow strip is ground wire. The other two wires have equal
usage. They are both hot wires for 240 V. And one is hot one is netural under 120 V.
Quick Setup:
1. Wear a proper helmet (Figure 1.1) to protect your eyes
from harmful plasma cutting arc radiation. Wear safety
gloves to protect your hands during operation.
2. Connect the machine air inlet (on the back of the machine, use stand NPT 1/4” industry
type D coupler, Figure 1.2) to an air compressor (Figure 1.3 & 1.4) and set the air
pressure to 65 - 70 PSI. (The capacity of air compressor should be larger than 4.0 SCFM
@ 65 PSI).
Figure 1.1
1
Figure 1.2
Power
Cord
Air In
Air
Inlet
65 - 70 PSI
Figure 1.3
Figure 1.4
Air
Inlet
Loading ...
Loading ...
Loading ...