Loading ...
Loading ...
Loading ...
USE - 4991477A185/D
e
function.
Auto-Vent 2.0 function (on some models
only)
The Auto-Vent 2.0 function is disabled by
default, but can be enabled from the user menu.
This function has an automatic and a manual
mode:
• Automatic mode adjusts the hood extractor
fan speed according to the total power of
the appliance (see “User menu - option U2).
• Manual mode allows you to adjust the
extractor fan speed by pressing the
button.
After switching on the hob, to activate manual
mode:
1. Press the button.
2. Each subsequent press of the button
increases the hood fan speed according to
a cyclic sequence with 5 levels of
adjustment, from 0 (off) to 4 (maximum
speed).
To go back to automatic mode, the appliance
has to be switched off and on again.
User menu
The user menu allows you to modify some
operating characteristics of the appliance. There
are 4 options are available. Each option is
marked with the letter “U” together with a
progressive number on the timer display.
Accessing the user menu
1. If the hob is off, switch it on using the
button.
2. Press again within 3 seconds to switch it
off; the icon starts to flash.
3. Press the and buttons at the same
time until the graph bars appear above the
scroll bars of the right zones.
4. Press the centre of both scroll bars at the
same time to complete the access
procedure.
User options
Once you have accessed the user menu, the first
option that appears is the power limitation
option (option U0), which should only be
modified by the installer (see "Power limitation
procedure").
Use the and buttons to move between
the options.
To select the values for each option, press the
left half of the scroll bar to scroll backwards and
the right half to scroll forwards.
Option U1 (on some models only) allows you to
activate or deactivate the Auto-Vent 2.0
function:
• 0: function off.
• 1: function on.
Option U2 (on some models only) allows you to
• This function allows you to control
the speed of the hood extractor fan
via a wireless connection.
• The hood must be designed to use
the Auto-Vent 2.0 function.
• The connection is always one way,
from the hob to the hood. It is not
possible to control the hob via the
hood.
Refer to the hood manual for more
detailed information.
Option Description
Power limitation (kW) - Modifica-
tion restricted to the installer
Activation and deactivation of the
Auto-Vent 2.0 function (on some
models only)
Auto-Vent 2.0 configuration in auto-
matic mode (on some models only)
Option restricted
Loading ...
Loading ...
Loading ...