Loading ...
Loading ...
Loading ...
USE - 4391477A185/D
e
Preliminary operations
• Remove any protective film from the outside
or inside of the appliance, including any
accessories (if present).
• Remove any labels (apart from the technical
data plate).
Using the accessories
Trivet
The trivets and reduction pan supports must be
placed on the hob pan supports. Make sure
they are placed properly.
The trivet should only be used on the UR burner.
Cookware suitable for use in induction
cooking
Cookware used on the induction cooking
surface must be made of metal, with magnetic
properties and a sufficiently large base.
Suitable cookware:
• Enamelled steel cookware with thick bases.
• Cast iron cookware with an enamelled
base.
• Cookware in multilayer stainless steel, ferritic
stainless steel and aluminium with a special
base.
Unsuitable cookware:
• Copper, stainless steel, aluminium, fireproof
glass, wood, ceramic and terracotta
cookware.
Cookware diameters
To ensure that the appliance detects the
containers correctly and for best results, use the
pan sizes indicated in the following table.
Bear in mind the following:
• Pans should not extend beyond the lines
marked on the surface of the appliance.
• Do not place pans near to the edges of the
glass ceramic surface or close to the control
panel.
• If you use a griddle, it must have a maximum
size of and 36 x 20 cm for zones 1 - 2.
Practical tips for using the hob
For better burner efficiency and to minimise gas
consumption, use pans with lids and of suitable
size for the burner, so that the flames do not
reach up the sides of the pan. Once the contents
come to the boil, turn down the flame far
enough to ensure that the liquid does not boil
over.
Basic functions
First power connection
When connected to the power supply for the
first time, or after power has been switched
back on after a power failure, an automatic
check is carried out that control turns on the
indicator lights and the displays for a few
seconds. Afterwards, the appliance can be
used normally.
Switching on and off
Press and hold the button for at least one
second to switch on the appliance. To turn off
the appliance, press the button until a sound
is emitted. The appliance will switch off
automatically after about 10 seconds of
inactivity.
Using the hob
All the appliance’s control and monitoring
devices are located together on the front panel.
See General safety instructions.
Cooking zones
Minimum diam-
eter (mm)
Recommended
diameter (mm)
1 - 2 (Single) 90 - 110 170 - 190
1 - 2 (Bridge) 190 - 230 240
Burner Pan diameter
AUX 8 - 18 cm
R 20 - 26 cm
UR 20 - 30 cm
UR-3c 20 - 30 cm
Loading ...
Loading ...
Loading ...