Loading ...
Loading ...
Loading ...
STEP 5:
Connect the Extended Wire (No. 36) to the Sensor Wire (No. 35) then attach the
Rail Tube (No. 45) to the Main Frame (No. 1) using Bolts (No. 34), Washers (No.
37), and Nuts (No. 38).
Insert Knob (No. 33) and Washer (No. 15) and turn to tighten.
Check that the Adjustable Foot Pad (No. 40) does not touch the floor. If it is touching
the floor, then the Knob (No. 40) has not been tightened. Try lifting the Rail Tube (No.
45) slightly and tighten the Knob (No. 40).
The assembly is now complete!
Loading ...
Loading ...