Loading ...
Loading ...
Loading ...
12
Troubleshooting
Motor does not run
Motor power drops
Motor performance drops
• Unplug the unit from the power source and check that the blade hub is able
to rotate freely.
• Check mains and extension cord.
• Clean discharge channel/housing.
• Start hover grass cutter on short grass or in a previously mowed area and tilt
back.
• Check that you are using a suitable extension cord of proper gauge and
length (see Extension Cord Chart pg. 2).
• Power source (e.g. generator) has too low voltage.
• Replace the cutting blades (contact an authorized Snow Joe
®
+ Sun Joe
®
service center).
Problem Remedy
Only a company specialist may be able to correct faults that cannot be rectied with the aid of this table. Please call the
Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE (1-866-766-9563).
Optional Accessories
m
WARNING! ALWAYS use only authorized Snow Joe
®
+ Sun Joe
®
replacement parts and accessories. NEVER use
replacement parts or accessories that are not intended for use with this tool. Contact Snow Joe
®
+ Sun Joe
®
if you are unsure
whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory
can be dangerous and could cause injury or mechanical damage.
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe
®
+ Sun Joe
®
to provide notice of such
changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
ModelAccessories Item
1
12 Pack Replacement Blades
MJ-HVR12E-SBLD
Loading ...
Loading ...
Loading ...