Loading ...
Loading ...
Loading ...
13. Tighten the grub screws (#8) with the Allen key supplied
(#13), this will secure your towel rail to the wall. If using the
Through Wall Bush you will need to replace the ‘grub’ #7
screw in that leg for the Pointed grub screw (#5).
Installing your Towel Warmer
8. Drill holes.
9. If installing into Gib board, Concrete or Block, insert wall
plugs (#12) into the wall.
10. If using an exposed cable, insert a long screw through the
mounting bush, then fix into wall plug ensuring the fit is
secure. Do this for all 4 legs.
12. Align your towel rail over the top of the mounting bushes,
ensure all legs cover the mounting bush. Make sure the
towel rail fits correctly. Do not force into place if the
alignment is not correct.
11. If completing a concealed cable installation, you will need
to use the Through Wall Bush (#4) for mounting the last
leg. Drill a larger hole in the wall (13mm) to accommodate
the Through Wall Bush. Ideally you should drill through a
timber joist to give it strength.
Loading ...
Loading ...
Loading ...