Loading ...
Loading ...
Loading ...
38 - INSTALLATION 91477B059/A
Power limitation procedure (60 cm
models)
To modify the maximum power absorbed by the
appliance (within a minute of connecting it to the
power supply):
1. Press and hold the button.
2. The current power level is shown on the
displays of the central zones; use the timer
buttons and to modify it.
3. To confirm, press the timer buttons and
at the same time.
4. To cancel the selection, press the ON/OFF
button .
Table of power draws
Power limitation procedure (80/90
cm models)
To modify the maximum power absorbed by the
appliance (within a minute of connecting it to the
power supply):
1. Press the timer buttons and at the
same time; will be displayed
2. The current power level is shown on the
displays of the central zones; use the timer
buttons and to modify it.
3. To confirm, press the timer buttons and
at the same time.
4. To cancel the selection, press the ON/OFF
button .
Table of power draws
Section cut from the countertop
Safety instructions for positioning and
installation
• Installation can be carried out on various
materials such as masonry, metal, solid
wood or plastic laminated wood as long as
they are heat resistant (>90°C).
• Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
• If the piece of furniture does not have the
required recess opening, either it will have
to be cut or masonry work carried out by a
competent technician.
• The minimum clearance between exhaust
hoods and the cooking surface must be at
least the distance indicated in the exhaust
hood installation instructions.
• The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the assembly
instructions.
• This procedure is restricted to the
installer.
• It can only be modified within a
minute of connecting the appliance
to the power supply.
• The appliance, according to the
model, is factory set to use the
maximum available power.
The Eco-Logic Advance function
increases or decreases the power level
in steps of 0.1 kW at each touch.
Models
Power (kW)
maximum minimum
60 cm 6.0 2.5
• This procedure is restricted to the
installer.
• It can only be modified within a
minute of connecting the appliance
to the power supply.
• The appliance, according to the
model, is factory set to use the
maximum available power.
The Eco-Logic Advance function
increases or decreases the power level
in steps of 0.1 kW at each touch.
Models
Power (kW)
maximum minimum
80 cm 7.4 2.5
90 cm - 4 zones 7.4 2.5
90 cm - 5 zones 9.1 2.5
See General safety instructions.
Loading ...
Loading ...
Loading ...