Loading ...
Loading ...
Loading ...
_"STEP 5:
KK (11) BB (2)
RR (2)
• Attach lower door assembly to unit as shown, using (2) short
pivot pins (2) (RR) and (2) screws (BB).
• Wrench tighten screws (BB). Do not overtighten.
• Close canopy and test lock.
RR
\\\\\
/
BB-. i
X,
Lowerdoor
assembly
Note: To install plastic rivet (KK), fully seat the rivet in the hole
then depress the plunger to hold in place.
• Install (4) plastic rivets (KK) in the front flange of each side
on the unit as shown.
• Install (3) plastic rivets in holes along bottom edge of the
lower door as shown.
fSTEP 6:
Note: To prevent drilling into the metal cabinet top, take the
removable top off of the cabinet or move the part to be drilled
away from the metal cabinet top before drilling.
• Mark centers of clearance holes to be drilled in removable
cabinet top using template provided.
• Align corner (A) of the template and mark the holes labeled
(1).
Corner A
Front of cabinet
• Align corner (B) of the template and mark the holes labeled
(2).
Corner B
_cabinet
• Align corner (C) of the template and mark the holes labeled
(3).
Corner C
nt of cabinet
• Align corner (D) of the template and mark the holes labeled
(4).
Corner D
Front of cabinet
_11111 J
J
Loading ...
Loading ...
Loading ...