Loading ...
Loading ...
Loading ...
P.03
OPERATION INSTRUACTIONS
IMPORTANT
Please let the dehumidifier stand upright box for before initial plugging in.24 hours
1. Position Your Dehumidifier
· Place the dehumidifier on a smooth, level floor that is strong enough to support the dehumidifier
with a full bucket of water.
· To maintain efficiency, operate the dehumidifier in an enclosed area. Keep nearby doors and
windows closed.
· Maintain a minimum clearance of 20 cm (7.9 inches)
on the sides and back of the dehumidifier and 40 cm
(16 inches) on the top of the dehumidifier to allow
for proper air circulation.
· To use the dehumidifier to dry wet clothes, maintain
a minimum clearance of 40 cm (16 inches) to the air
outlet of the dehumidifier to avoid water dripping
into the dehumidifier.
· The functioning temperature range is between 5°C
(41°F) and 35°C (95°F).
Uncoil the power cord and plug it firmly into a properly grounded 110-120 volt AC outlet.
After plugged in, the control panel will light up for 1-2 seconds and then goes off, which is the
normal self-diagnose process and does not require any user intervention.
3. Turn the Dehumidifier On
Press the POWER button to turn the dehumidifier on. Typically, the dehumidifier will run in the
default setting with set humidity 30% at low fan speed in the normal DEHUMIDIFY(DEHU) mode.
NOTE: :If the dehumidifier does not run automatically and you see the “FULL” icon illuminate, please
remove the water bucket and re-install it properly
2.Plug in
(7.9inch)
(7.9inch)
Loading ...
Loading ...
Loading ...