Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
Note:
If all solutions given above don’t work for you, please take actions below:
1. Re-set the robot by switching on the power button at the right side of
main body.
2. If reset action doesn’t work, please send the robot to seller for repairing.
Note:
Particular specications are subjected to change without prior notice.
Don’t forget to register your unit to activate your 1 year warranty!
16
Problem
Possible Cause
Soluon
Robot suddenly stops
cleaning and indicator
stays blue.
Robot was picked up
(sensors detect cli or
wheel o the ground).
Put the robot on the
solid oor and re-start
the robot.
Place the robot on
ground, turn on the
robot, its indicator is in
blue ( without
charging).
Cli sensor fault.
1. Clean cli sensor.
2. If soluons given
above doesn’t work,
send it to the seller for
repair.
Robot does not change
direcon when it comes
up against obstacle.
Bumper sensor fault.
Check the sensor to see
if it is covered by any
object.
During charging, LED
indicator ashes red
quickly and robot
beeps.
Power switch of robot
might not turned on.
Switch on the robot.
LED indicator ashes
red quickly.
Baery low power.
Fully charge the
baery.
Blue LED ashes once,
Red LED ashes once.
Side brush get stuck.
Put robot on at
surface and clean side
brush.
www.PyleUSA.com
Loading ...
Loading ...