Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
For normal use, it is not suggested to remove the oven door.
However, if necessary, follow these instructions. The oven door is
heavy.
To Remove:
1. Open the oven door all the way.
2. Insert short end of door removal pins, included with the oven,
into both hinge hangers. Two %2 in. (4 ram) allen wrenches or
two nails of similar diameter can be used ifdoor removal pins
have bean misplaced. Do not remove the pins while the door
is removed.
1
1.Insertsmallend ofpin here
3. Grasp under door handle and carefully close door as far as it
will shut. Pull door out from the bottom.
To Replace:
1. Make sure door removal pins have not been removed. Fit
hinge arms into slots in frame. Push in at lower corner to
ensure hinge arms are fully engaged.
2. Open the door completely and remove the door removal pins.
Save them for future use.
3. Close oven door. Ifthe door does not operate freely, repeat
the process.
Try the solutions suggested here first in order to avoid the
cost of an unnecessary service call.
Nothing will operate
• Has a household fuse been blown or has the circuit
breaker been tripped?
Replace the fuse or reset the circuit.
• Isthe appliance wiredpropedy?
See InstallationInstructions.
Oven will not operate
• Is the electronic oven control set correctly?
See "Electronic Oven Control" section.
Has a delay start been set?
See "Timed Cooking" section.
On some models, is the Control Lock set?.
See "Control Lock" section.
On some models,isthe Sabbath Mode set?,
See "Sabbath Mode" section.
On double oven models, is one oven self-cleaning?
When one oven isself-cleaning the other oven cannot be set
or turned on.
On double oven models, has the correct oven been
selected?
Choose UPPER OVEN or LOWER OVEN first.
Oven temperature too high or too low
• Does the oven temperature calibration need adjustment?.
See "Oven Temperature Control" section.
Display shows messages
• Is the display showing "PF", "PF id=27" or "PF id--30"?
There has been a power failure. Clear the display. See
"Display(s)" section. On some models, reset the clock, if
needed, See "Clock" section.
• Is the display showing a letter followed by a number?
Clear the display. See "Display(s)" section. If it reappears, call
for service. See "Assistance or Service" section.
Self-Cleaning cycle will not operate
• Is the oven door open?
Close the oven door all the way.
• Has the function been entered?
See "Self-Cleaning Cycle" section.
• On some models, has a delay start Self-Clean cycle been
set?.
See "Self-Cleening Cycle" section.
/
• Has a delay start been set)
See "Timed Cooking" sectien,
• On doub e oven models, is one oven self-cleaning?
When one oven is self-cleaning, the other oven cannot be set
to self-clean.
14
Loading ...
Loading ...