Loading ...
Loading ...
Loading ...
3.9.1 Read Codes
1) Select [Read Codes] and press ENTER in the diagnostic menu.If
there are some codes, the screen will display the codes as follows.
Diagnostic Menu
Read Codes
Erase Codes
I/M Readiness
Data Stream
Freeze Frame
O2 Sensor Test
2) According to the above figure, select another item by pressing UP or
DOWN and press ENTER to confirm.
Read Codes
P0107
1/2,
General
Manifold Absolute
Pressure/Barometric
Pressure Circuit Low
3)After viewing all codes, you can press EXIT to return to the previous
menu.
3.9.2 Erase Codes
1)Select [Erase Codes], the screen will display the interface shown
below.
Press ENTER to delete the DTCs, the screen will display the interface
shown below:
17
Loading ...
Loading ...
Loading ...