1. Home
  2. Bosch
  3. Bosch TCA5401/01 User Manual
  4. Page 19

Bosch TCA5401/01 Automatic coffee machines

Operating Instructions - Page 19

For TCA5401/01.

PDF File Manual, 93 pages, Read Online | Download pdf file

TCA5401/01 photo
Loading ...
Loading ...
Loading ...
15
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
●Placeanappropriatecupunderthe
nozzle 9.
●Pushthesleeveonthenozzle9 all the
way down.
●Turnthedial8 to g/h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
may sputter a little. Do not touch the nozzle
9 or aim it at anyone.
●Endtheprocessbyturningthedial8
back to O.
Steam for foaming milk
The appliance must be ready for use. You
canfoamthemilkrstandaddthecoffee
on top, or foam the milk separately and
pour it into the coffee.
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
●Pushthesleeveonthenozzle9 all the
way down.
●Fillthecupapproximately1/3fullofmilk.
●Pressthehbutton.Itwillstarttoash.
i The appliance will heat up for approx. 20
seconds.
●Immersethenozzle9 deep into the milk,
but do not let it touch the bottom of the
cup.
●Whentheh button lights up and 8
appears on the display, turn the dial 8 to
g/h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
9 may sputter. Escaping steam is very hot
and may cause liquids to sputter. Do not
touch the nozzle 9 or aim it at anyone.
●Rotatethecupslowlyuntilthemilkisfully
foamed.
●Endtheprocessbyturningthedial8
back to O.
Note: When the nozzle 9 has cooled
down, clean it immediately. Dried residue is
difculttoremove.
Tip: If possible, use cold low-fat (1.5% fat)
milk.
Steam for heating drinks
! Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
The appliance must be ready for use.
●Pushthesleeveonthenozzle9 all the
way up.
●Pressthehbutton.Itwillstarttoash.
i The appliance will now heat up for
approx. 20 seconds.
●Immersethenozzle9 deep into the liquid
you want to heat.
●Whentheh button lights up and 8
appears on the display, turn dial 8 to g/
h.
! Risk of scalding
When the dial 8 is set to g/h, the nozzle
9 may sputter a little. Escaping steam is
very hot and may cause liquid to sputter.
Do not touch the nozzle 9 or aim it at
anyone.
●Endtheprocessbyturningthedial8
back to O.
Note: When the nozzle 9 has cooled down,
cleanimmediately.Driedresidueisdifcult
to remove.
en
Loading ...
Loading ...
Loading ...