Loading ...
Loading ...
Loading ...
10
Problem Possible cause Solution
The iron leaves a
shine or an
imprint on the
garment.
The surface to be ironed
was uneven, for instance
because you were
ironing over a seam or a
fold in the garment.
Perfect Care is safe on all
garments. The shine or imprint is
not permanent and will disappear
when you wash the garment. Avoid
ironing over seams or folds or you
can place a cotton cloth over the
area to be ironed to avoid imprints.
The ironing
board cover
becomes wet or
water droplets
come out of the
soleplate.
Steam has condensed
on the ironing board
cover after a long ironing
session.
Replace the ironing board cover if
the foam material has worn out.
You can also add an extra layer of
felt material under the ironing
board cover to prevent
condensation on the ironing board.
You may have an ironing
board that is not
designed to cope with
the high steam rate of
the steam generator.
Put an extra layer of felt material
under the ironing board cover to
prevent condensation on the
ironing board.
Steam continues
to come out after
I release the
steam trigger.
Steam is generated in
the soleplate. When you
release the steam trigger,
remaining water is
transformed into steam.
This is normal.
Release the steam trigger 2 to 3
seconds before you place the iron
back on the iron platform or ironing
board.
There is a strong
gush of steam
when I release
the steam trigger
after placing the
iron on the iron
platform.
When the iron is tilted
upwards, remaining
water is collected and
converted into strong
steam. This is normal.
Release the steam trigger 2 to 3
seconds before you place the iron
back on the iron platform or ironing
board.
Steam is weak. You do not press the
steam trigger
continuously.
Keep the steam trigger pressed
continuously when you move the
iron over the fabric.
You use the ECO mode. For more steam, switch o the ECO
mode by pressing the ECO button.
The green ECO light goes o.
Steam does not
come out
immediately
when I press the
steam trigger.
Water is converted into
steam in the soleplate.
When you press the
steam trigger, it will take 1
to 2 seconds until steam
is generated and
released. This is normal.
Keep the steam trigger pressed
continuously when you move the
iron over the fabric.
ENGLISH
Loading ...
Loading ...
Loading ...