Loading ...
Loading ...
Loading ...
9
Problem Possible cause Solution
The light of the
Calc-Clean
button ashes
and the
appliance beeps
every time I
press the steam
trigger. No steam
comes out of the
soleplate.
You have not done or
have not completed the
Calc-Clean process.
Perform the Calc-Clean process to
enable the steam function again
(see chapter ‘IMPORTANT -
Cleaning and maintenance’).
The appliance
has switched o.
The safety auto-o
function was activated.
This happens
automatically when the
steam generator has not
been used for more than
5 minutes.
Set the on/o switch to ‘o’
position and then to ‘on’ position.
The appliance
produces a loud
pumping sound.
The water tank is empty. Fill the water tank with water and
press the steam trigger until the
pumping sound becomes softer
and steam comes out of the
soleplate.
Water droplets
come out of the
soleplate.
After the Calc-Clean
process, remaining water
may drip out of the
soleplate.
Wipe the soleplate dry with a piece
of cloth. If the light in the Calc-
Clean button still ashes and the
appliance still beeps, perform the
Calc-Clean process (see chapter
‘IMPORTANT - Cleaning and
maintenance’).
The Calc-Clean process
has not been completed.
You have to perform the Calc-
Clean process again (see chapter
‘IMPORTANT - Cleaning and
maintenance’).
Dirty water and
impurities come
out of the
soleplate.
Impurities or chemicals
present in the water have
deposited in the steam
vents and/or soleplate.
Perform the Calc-Clean process
regularly (see chapter ‘IMPORTANT
- Cleaning and maintenance’).
Water ushes
out of the
soleplate.
You have accidentally
started the Calc-Clean
process (see chapter
‘IMPORTANT - Cleaning
and maintenance’).
Switch o the appliance. Then
switch it back on again. Let the iron
heat up until the ‘iron ready’ light
lights up steadily.
The Calc-Clean
process does not
start.
You have not pressed
the Calc-Clean button for
2 seconds until the
appliance started
beeping.
See chapter ‘IMPORTANT -
Cleaning and maintenance’.
ENGLISH
Loading ...
Loading ...
Loading ...