Loading ...
Loading ...
Loading ...
56
57
HARNESS MODE
HARNESS MODE
9
INSTALL USING LATCH
CHECK YOUR WORK
Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1” (25 mm)
from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the LATCH and
Tether Straps, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
Locate Tether Anchor in your vehicle. Attach Tether Hook and pull Tether
Adjuster strap to tighten.
9
INSTALL USING LATCH
Loading ...
Loading ...
Loading ...