IS0176E_02
Harness+Booster
User Guide
For future use,
STORE USER GUIDE in
compartment at front of base.
©2020 Artsana USA, Inc. 1/20
www.chiccousa.com
TABLE OF CONTENTS
Registration and Recall 2
Child Guidelines 4
Safe Use Checklist 6
Important Warnings 8
Best Practices 14
Need Help? 15
Child Restraint Components 16
LATCH and Tether Storage 20
Selecting Harness/Booster Mode 22
Adjusting Crotch Strap 26
Adjusting Headrest 28
Adjusting Recline 30
Cup Holder 32
Vehicle Seating Positions 34
Vehicle Seat Belts Harness Mode 36
Vehicle Seat Belts Booster Mode 38
What is LATCH? 40
What is a Tether? 42
Harness Setup 44
Install Using LATCH 50
Install Using LAP-SHOULDER BELT 58
Install Using LAP BELT ONLY 64
Securing Child with Harness 70
Securing Child Checklist 82
Booster Seat Setup 84
Booster Seat Installation 94
Securing Child in Booster Seat 100
Convert to Harness Mode 106
Securing Child Checklist 108
Installation on an Aircraft 110
Cleaning and Maintenance 112
CHILD RESTRAINT OVERVIEW
ADDITIONAL INFORMATION
If you have any problems with your Chicco Child Restraint,
or any questions regarding installation or use, please call:
Chicco Customer Service
1-877-424-4226
Please have Model and Serial Number available when you call.
These are located on a label on the bottom of the Child Restraint.
For future reference, fill in the information below. The information can be found on the label
on the bottom of the Child Restraint.
Model Number:
Serial Number:
Manufactured In:
HARNESS MODE
BOOSTER MODE
VEHICLE INFORMATION
TABLE OF CONTENTS
Registration and Recall 2
Child Guidelines 4
Safe Use Checklist 6
Important Warnings 8
Best Practices 14
Need Help? 15
Child Restraint Components 16
LATCH and Tether Storage 20
Selecting Harness/Booster Mode 22
Adjusting Crotch Strap 26
Adjusting Headrest 28
Adjusting Recline 30
Cup Holder 32
Vehicle Seating Positions 34
Vehicle Seat Belts Harness Mode 36
Vehicle Seat Belts Booster Mode 38
What is LATCH? 40
What is a Tether? 42
Harness Setup 44
Install Using LATCH 50
Install Using LAP-SHOULDER BELT 58
Install Using LAP BELT ONLY 64
Securing Child with Harness 70
Securing Child Checklist 82
Booster Seat Setup 84
Booster Seat Installation 94
Securing Child in Booster Seat 100
Convert to Harness Mode 106
Securing Child Checklist 108
Installation on an Aircraft 110
Cleaning and Maintenance 112
CHILD RESTRAINT OVERVIEW
ADDITIONAL INFORMATION
If you have any problems with your Chicco Child Restraint,
or any questions regarding installation or use, please call:
Chicco Customer Service
1-877-424-4226
Please have Model and Serial Number available when you call.
These are located on a label on the bottom of the Child Restraint.
For future reference, fill in the information below. The information can be found on the label
on the bottom of the Child Restraint.
Model Number:
Serial Number:
Manufactured In:
HARNESS MODE
BOOSTER MODE
VEHICLE INFORMATION
2
3
REGISTRATION AND RECALL REGISTRATION AND RECALL
Please complete the Registration Card that came with
your Child Restraint and mail it promptly.
Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall.
Send your name, address, e-mail address if available, and the restraint’s model number and manufacturing
date to:
Artsana USA, Inc.
1826 William Penn Way
Lancaster, PA 17601
or call 1-877-424-4226
or register online at http://www.chiccousa.com/carseatregistration.aspx
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236 (TTY: 1-800-424-9153), or go to http://www.NHTSA.gov.
PAGE INTENTIONALLY LEFT BLANK
2
3
REGISTRATION AND RECALL REGISTRATION AND RECALL
Please complete the Registration Card that came with
your Child Restraint and mail it promptly.
Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall.
Send your name, address, e-mail address if available, and the restraint’s model number and manufacturing
date to:
Artsana USA, Inc.
1826 William Penn Way
Lancaster, PA 17601
or call 1-877-424-4226
or register online at http://www.chiccousa.com/carseatregistration.aspx
For recall information, call the U.S. Government’s Vehicle Safety Hotline at
1-888-327-4236 (TTY: 1-800-424-9153), or go to http://www.NHTSA.gov.
PAGE INTENTIONALLY LEFT BLANK
4
5
HARNESS MODE is designed for children who are at least 2 year old.
ONLY use this Child Restraint if the child meets BOTH of the following
Weight and Height requirements:
• Weight is between 25 and 65 pounds (11.4 and 29.5 kg).
• Height is 54 inches (137 cm) tall or less.
BOOSTER MODE is designed for children who are at least 4 years old.
ONLY use this Child Restraint if the child meets ALL of the following
requirements:
• Weight is between 40 and 100 pounds (18 and 45.3 kg).
• Height is between 38 to 57 inches (97 - 145 cm).
• Demonstrates an ability to sit relatively still and properly in
a seat belt at all times.
CHILD GUIDELINES CHILD GUIDELINES
Select
Forward -Facing
HARNESS MODE on page 22.
Select
Forward-Facing
BOOSTER MODE on page 24.
BOOSTER MODE
HARNESS MODE
25 lbs. 40 lbs. 65 lbs. 100 lbs.
(11.4 kg) (18 kg) (29.5 kg) (45.3 kg)
NO LATCH
4
5
HARNESS MODE is designed for children who are at least 2 year old.
ONLY use this Child Restraint if the child meets BOTH of the following
Weight and Height requirements:
• Weight is between 25 and 65 pounds (11.4 and 29.5 kg).
• Height is 54 inches (137 cm) tall or less.
BOOSTER MODE is designed for children who are at least 4 years old.
ONLY use this Child Restraint if the child meets ALL of the following
requirements:
• Weight is between 40 and 100 pounds (18 and 45.3 kg).
• Height is between 38 to 57 inches (97 - 145 cm).
• Demonstrates an ability to sit relatively still and properly in
a seat belt at all times.
CHILD GUIDELINES CHILD GUIDELINES
Select
Forward -Facing
HARNESS MODE on page 22.
Select
Forward-Facing
BOOSTER MODE on page 24.
BOOSTER MODE
HARNESS MODE
25 lbs. 40 lbs. 65 lbs. 100 lbs.
(11.4 kg) (18 kg) (29.5 kg) (45.3 kg)
NO LATCH
6
7
Make sure your child meets the age, weight, and height requirements:
Refer to the “Child Guidelines” section on page 4.
Choose the proper Child Restraint configuration:
Select a safe seating location in your car:
SAFE USE CHECKLIST
YOUR CHILD’S SAFETY DEPENDS ON YOU! You MUST follow the
detailed instructions in this User Guide to ensure the steps below are
performed correctly!
Ensure that the Child Restraint is properly leveled when installed:
Check for a snug fit in your car when using in HARNESS MODE :
While holding Child Restraint near belt path used, pull side to side and forward.
Belt should remain tight and Child Restraint should not move more than
1” (25 mm) from vehicle seat back or side-to-side.
Secure your child:
SAFE USE CHECKLIST
HARNESS MODE requirements on page 23
BOOSTER MODE requirements on page 25
HARNESS MODE requirements on page 48
BOOSTER MODE requirements on page 98
HARNESS MODE requirements on page 35
BOOSTER MODE requirements on page 35
HARNESS MODE requirements on page 70
BOOSTER MODE requirements on page 102
6
7
Make sure your child meets the age, weight, and height requirements:
Refer to the “Child Guidelines” section on page 4.
Choose the proper Child Restraint configuration:
Select a safe seating location in your car:
SAFE USE CHECKLIST
YOUR CHILD’S SAFETY DEPENDS ON YOU! You MUST follow the
detailed instructions in this User Guide to ensure the steps below are
performed correctly!
Ensure that the Child Restraint is properly leveled when installed:
Check for a snug fit in your car when using in HARNESS MODE :
While holding Child Restraint near belt path used, pull side to side and forward.
Belt should remain tight and Child Restraint should not move more than
1” (25 mm) from vehicle seat back or side-to-side.
Secure your child:
SAFE USE CHECKLIST
HARNESS MODE requirements on page 23
BOOSTER MODE requirements on page 25
HARNESS MODE requirements on page 48
BOOSTER MODE requirements on page 98
HARNESS MODE requirements on page 35
BOOSTER MODE requirements on page 35
HARNESS MODE requirements on page 70
BOOSTER MODE requirements on page 102
8
9
IMPORTANT WARNINGS
FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE PRODUCT
LABELS CAN RESULT IN SERIOUS INJURY OR DEATH TO YOUR CHILD.
Take Time to Read This User Guide
• Carefully read and understand all instructions and warnings in this User Guide. Your child’s safety depends
on you knowing how to setup, install and use this Child Restraint properly.
• Before installing this Child Restraint in a vehicle, be sure to also check the vehicle owner’s manual for
information on proper installation.
• NEVER allow others to use this Child Restraint until they have read and understood all instructions in this
User Guide.
• This Child Restraint is not intended for use outside of the vehicle.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Make Sure Child Fits This Child Restraint
• Use ONLY in
HARNESS MODE
with children who weigh between 25 lbs (11.4 kg) and 65 lbs (29.5 kg) and
whose height is 54 inches (137 cm) or less. Determine the right installation setup for your child’s age, weight and
height.
Secure Child Properly
• Snugly adjust the harness around your child. A loose harness could cause the child to be ejected in a sudden
stop or crash, resulting in serious injury or death.
• NEVER use clothing or blankets that interfere with fastening or tightening the harness. An unsecured child
could be ejected in a sudden stop or crash!
A snug strap should not allow any slack. It lies in a relatively straight line without sagging.
It does not press on the child’s flesh or push the child’s body into an unnatural position.
To keep child warm, place a blanket over child and restraint AFTER you have properly secured
child in harness.
Make Sure Child Fits This Child Restraint
• Use ONLY in
BOOSTER MODE
with children who weigh between 40 lbs (18 kg) and 100 lbs (45.3 kg) and
whose height is 38 - 57 inches (97 - 145 cm). Determine the right installation setup for your child’s age, weight,
height and ability to sit properly at all times.
8
9
IMPORTANT WARNINGS
FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE PRODUCT
LABELS CAN RESULT IN SERIOUS INJURY OR DEATH TO YOUR CHILD.
Take Time to Read This User Guide
• Carefully read and understand all instructions and warnings in this User Guide. Your child’s safety depends
on you knowing how to setup, install and use this Child Restraint properly.
• Before installing this Child Restraint in a vehicle, be sure to also check the vehicle owner’s manual for
information on proper installation.
• NEVER allow others to use this Child Restraint until they have read and understood all instructions in this
User Guide.
• This Child Restraint is not intended for use outside of the vehicle.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Make Sure Child Fits This Child Restraint
• Use ONLY in
HARNESS MODE
with children who weigh between 25 lbs (11.4 kg) and 65 lbs (29.5 kg) and
whose height is 54 inches (137 cm) or less. Determine the right installation setup for your child’s age, weight and
height.
Secure Child Properly
• Snugly adjust the harness around your child. A loose harness could cause the child to be ejected in a sudden
stop or crash, resulting in serious injury or death.
• NEVER use clothing or blankets that interfere with fastening or tightening the harness. An unsecured child
could be ejected in a sudden stop or crash!
A snug strap should not allow any slack. It lies in a relatively straight line without sagging.
It does not press on the child’s flesh or push the child’s body into an unnatural position.
To keep child warm, place a blanket over child and restraint AFTER you have properly secured
child in harness.
Make Sure Child Fits This Child Restraint
• Use ONLY in
BOOSTER MODE
with children who weigh between 40 lbs (18 kg) and 100 lbs (45.3 kg) and
whose height is 38 - 57 inches (97 - 145 cm). Determine the right installation setup for your child’s age, weight,
height and ability to sit properly at all times.
10
11
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
• NEVER install in rear facing, side facing or on the back of a folded down vehicle seat.
• ALWAYS use this Child Restraint in the forward-facing orientation.
• ALWAYS secure this Child Restraint with the vehicle’s child restraint anchorage system (LATCH) if
available OR the vehicle seat belt when used in harness mode. Refer to Page 5 for proper use/child weight
limits when installing with LATCH.
• DO NOT use the lower anchors of the child restraint anchorage system (LATCH system) with the internal
harness of the Child Restraint when restraining a child weighing more than 40 lbs (18 kg).
• NEVER use this seat in booster mode with only a Vehicle Lap Belt.
• Use ONLY the vehicle’s lap and shoulder belt system when restraining the child in this Booster Seat.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• DO NOT PLACE THIS CHILD RESTRAINT IN VEHICLE SEATING LOCATION WITH A FRONTAL AIR
BAG, UNLESS THE AIR BAG CAN BE TURNED OFF. If the airbag inflates, it can cause serious injury or
death to your child. For vehicles with side air bags, refer to your vehicle owner’s manual for information on
your child restraint installation.
According to accident statistics, children are safer when properly restrained in the rear seating
positions rather than in the front seat.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
Install Child Restraint Correctly
• ALWAYS install this Child Restraint in a back seat if possible.
Secure Child Properly
• ALWAYS check to make sure the buckle is securely latched. If the buckle separates, child could be killed or seriously
injured.
• Do not allow children to play in or around the Child Restraint.
• ALWAYS keep child properly secured whenever child is in Child Restraint.
• Position Lap-Shoulder Belt on your child in this Booster Seat. A loose or improperly positioned Lap-Shoulder
Belt could cause the child to be ejected in a sudden stop or crash, resulting in serious injury or death.
• Make sure vehicle Lap-Shoulder Belt is not loose on child in this Booster Seat. The belt must be kept snug
across child’s thighs and resting on the shoulder and across the center of the chest.
10
11
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
• NEVER install in rear facing, side facing or on the back of a folded down vehicle seat.
• ALWAYS use this Child Restraint in the forward-facing orientation.
• ALWAYS secure this Child Restraint with the vehicle’s child restraint anchorage system (LATCH) if
available OR the vehicle seat belt when used in harness mode. Refer to Page 5 for proper use/child weight
limits when installing with LATCH.
• DO NOT use the lower anchors of the child restraint anchorage system (LATCH system) with the internal
harness of the Child Restraint when restraining a child weighing more than 40 lbs (18 kg).
• NEVER use this seat in booster mode with only a Vehicle Lap Belt.
• Use ONLY the vehicle’s lap and shoulder belt system when restraining the child in this Booster Seat.
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• DO NOT PLACE THIS CHILD RESTRAINT IN VEHICLE SEATING LOCATION WITH A FRONTAL AIR
BAG, UNLESS THE AIR BAG CAN BE TURNED OFF. If the airbag inflates, it can cause serious injury or
death to your child. For vehicles with side air bags, refer to your vehicle owner’s manual for information on
your child restraint installation.
According to accident statistics, children are safer when properly restrained in the rear seating
positions rather than in the front seat.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
Install Child Restraint Correctly
• ALWAYS install this Child Restraint in a back seat if possible.
Secure Child Properly
• ALWAYS check to make sure the buckle is securely latched. If the buckle separates, child could be killed or seriously
injured.
• Do not allow children to play in or around the Child Restraint.
• ALWAYS keep child properly secured whenever child is in Child Restraint.
• Position Lap-Shoulder Belt on your child in this Booster Seat. A loose or improperly positioned Lap-Shoulder
Belt could cause the child to be ejected in a sudden stop or crash, resulting in serious injury or death.
• Make sure vehicle Lap-Shoulder Belt is not loose on child in this Booster Seat. The belt must be kept snug
across child’s thighs and resting on the shoulder and across the center of the chest.
12
13
Check Condition of Restraint
• DO NOT use if the Harness or LATCH straps are cut, frayed or damaged.
• DO NOT use this Child Restraint if it is more than 8 years old. Check manufacturer’s label on underside
of Child Restraint for the “Do Not Use After” date.
• DO NOT use any accessories, pads or products not included with this Child Restraint, unless
approved by Chicco USA. Doing so will void the warranty of this Child Restraint.
• You MUST replace this Child Restraint if it has been involved in a crash, even if you cannot see visible
damage. A damaged Child Restraint may not protect your child in a future crash.
• Never use the harness or adjuster strap to lift or carry this Child Restraint. Always carry this Child Restraint
by the tether strap or shell.
• Do not modify your Child Restraint.
• NEVER remove harness from Child Restraint without the proper removal and installation instructions
available from Chicco USA. Contact us by visiting the Chicco website at www.chiccousa.com or
call 1-877-424-4226.
• Do not use Child Restraint if any component is damaged, broken, or missing parts.
Call 1-877-424-4226 to find out if the damaged part or parts can be replaced.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• ALWAYS secure this seat, with the LATCH system or the vehicle’s lap-shoulder belt when unoccupied. It
could injure other occupants in a sudden stop or crash.
• ALWAYS use the top tether strap on this Child Restraint when used in harness mode, if a tether anchor is
available.
• NEVER use Child Restraint in a vehicle seating position where it cannot be secured tightly when installed for
harness mode. A loosely installed Child Restraint will not protect your child in a crash.
• DO NOT install this Child Restraint using an inflatable seat belt for harness mode. The interaction of the
inflatable portion of the vehicle’s belt with this Child Restraint can result in serious injury or death. Install
using LATCH instead, or move the Child Restraint to a position with a suitable seat belt type. Refer to your
vehicle owner’s manual for instructions for use with this Booster Seat.
Ensure Child’s Safety When Using Child Restraint
• STRANGULATION HAZARD: Your child can strangle in a loose Restraint Harness. Never leave your child
unattended in the vehicle.
12
13
Check Condition of Restraint
• DO NOT use if the Harness or LATCH straps are cut, frayed or damaged.
• DO NOT use this Child Restraint if it is more than 8 years old. Check manufacturer’s label on underside
of Child Restraint for the “Do Not Use After” date.
• DO NOT use any accessories, pads or products not included with this Child Restraint, unless
approved by Chicco USA. Doing so will void the warranty of this Child Restraint.
• You MUST replace this Child Restraint if it has been involved in a crash, even if you cannot see visible
damage. A damaged Child Restraint may not protect your child in a future crash.
• Never use the harness or adjuster strap to lift or carry this Child Restraint. Always carry this Child Restraint
by the tether strap or shell.
• Do not modify your Child Restraint.
• NEVER remove harness from Child Restraint without the proper removal and installation instructions
available from Chicco USA. Contact us by visiting the Chicco website at www.chiccousa.com or
call 1-877-424-4226.
• Do not use Child Restraint if any component is damaged, broken, or missing parts.
Call 1-877-424-4226 to find out if the damaged part or parts can be replaced.
IMPORTANT WARNINGS
IMPORTANT WARNINGS
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
WARNING
DEATH or SERIOUS INJURY CAN OCCUR
Install Child Restraint Correctly
• ALWAYS secure this seat, with the LATCH system or the vehicle’s lap-shoulder belt when unoccupied. It
could injure other occupants in a sudden stop or crash.
• ALWAYS use the top tether strap on this Child Restraint when used in harness mode, if a tether anchor is
available.
• NEVER use Child Restraint in a vehicle seating position where it cannot be secured tightly when installed for
harness mode. A loosely installed Child Restraint will not protect your child in a crash.
• DO NOT install this Child Restraint using an inflatable seat belt for harness mode. The interaction of the
inflatable portion of the vehicle’s belt with this Child Restraint can result in serious injury or death. Install
using LATCH instead, or move the Child Restraint to a position with a suitable seat belt type. Refer to your
vehicle owner’s manual for instructions for use with this Booster Seat.
Ensure Child’s Safety When Using Child Restraint
• STRANGULATION HAZARD: Your child can strangle in a loose Restraint Harness. Never leave your child
unattended in the vehicle.
14
15
BEST PRACTICES
• Ensure all vehicle occupants are properly restrained before traveling.
Unrestrained occupants can be thrown around and may be seriously injured or
seriously injure other occupants in a sharp turn, sudden stop or crash.
• Do not leave loose objects, such as books, bags, etc., in the back of the vehicle.
In the event of a sharp turn, sudden stop, or crash, loose objects can be thrown
around and possibly cause serious injury to vehicle occupants.
• Cover the Child Restraint when the vehicle is parked in sunlight. Parts of a
Child Restraint can become very hot if left in the sun. Contact with these parts
can burn a child’s skin. Always check the surface of any metal or plastic parts
before putting your child in the Child Restraint.
• To avoid strangulation, do not allow children to play with vehicle seat belts.
If possible, move unused belts out of reach.
• Do not use anything to raise the Child Restraint off the vehicle seat such as
a noodle or towel. In a sharp turn, sudden stop, or crash, the Child Restraint
could slide and potentially cause serious injury.
• Never use a second-hand Child Restraint with an unknown history.
• Never use any accessories that are not included with this Child Restraint,
unless specifically approved by Chicco. For more information, go to
www.chiccousa.com.
NEED HELP?
Need Help Securing Your Child Restraint?
The following sources are available to help ensure your Child Restraint is
properly installed:
• Contact Chicco, USA by visiting our website at www.chiccousa.com or
calling our Customer Service 1-877-424-4226. Please have Model and
Serial Number available when you call. These are located on a label on
the bottom of the Child Restraint.
• Refer to your vehicle manual for Child Restraint installation tips.
• Contact a certified Child Passenger Safety Technician in your area by
visiting safercar.gov and select “Find Local Child Seat Help” or call
1-866-SEAT CHECK (1-866-732-8243).
14
15
BEST PRACTICES
• Ensure all vehicle occupants are properly restrained before traveling.
Unrestrained occupants can be thrown around and may be seriously injured or
seriously injure other occupants in a sharp turn, sudden stop or crash.
• Do not leave loose objects, such as books, bags, etc., in the back of the vehicle.
In the event of a sharp turn, sudden stop, or crash, loose objects can be thrown
around and possibly cause serious injury to vehicle occupants.
• Cover the Child Restraint when the vehicle is parked in sunlight. Parts of a
Child Restraint can become very hot if left in the sun. Contact with these parts
can burn a child’s skin. Always check the surface of any metal or plastic parts
before putting your child in the Child Restraint.
• To avoid strangulation, do not allow children to play with vehicle seat belts.
If possible, move unused belts out of reach.
• Do not use anything to raise the Child Restraint off the vehicle seat such as
a noodle or towel. In a sharp turn, sudden stop, or crash, the Child Restraint
could slide and potentially cause serious injury.
• Never use a second-hand Child Restraint with an unknown history.
• Never use any accessories that are not included with this Child Restraint,
unless specifically approved by Chicco. For more information, go to
www.chiccousa.com.
NEED HELP?
Need Help Securing Your Child Restraint?
The following sources are available to help ensure your Child Restraint is
properly installed:
• Contact Chicco, USA by visiting our website at www.chiccousa.com or
calling our Customer Service 1-877-424-4226. Please have Model and
Serial Number available when you call. These are located on a label on
the bottom of the Child Restraint.
• Refer to your vehicle manual for Child Restraint installation tips.
• Contact a certified Child Passenger Safety Technician in your area by
visiting safercar.gov and select “Find Local Child Seat Help” or call
1-866-SEAT CHECK (1-866-732-8243).
16
17
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT COMPONENTS CHILD RESTRAINT COMPONENTS
SuperCinch
®
LATCH Tightener
(PULL 2
nd)
Tether
Storage
Tether
Strap
Vehicle Belt
Lock-Off
LATCH Adjuster
(PULL 1
st
)
Vehicle Belt
Lock-Off
Harness Buckle
Harness Strap
Crotch Strap
Pad
Harness
Adjustment
Strap
Harness
Release Button
Chest Clip Pads
Recline
Adjustment Handle
Headrest
Adjustment Tab
Shoulder Pads
Recline Position
Indicator
Bubble Level
Indicator
Booster
Belt Path
Booster Shoulder
Belt Guide
Cup Holder
Cup Holder
Release Button
KidConsole
Padded Waist Belt
Chest Clip
Seat Body
Side Zipper
16
17
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT COMPONENTS CHILD RESTRAINT COMPONENTS
SuperCinch
®
LATCH Tightener
(PULL 2
nd)
Tether
Storage
Tether
Strap
Vehicle Belt
Lock-Off
LATCH Adjuster
(PULL 1
st
)
Vehicle Belt
Lock-Off
Harness Buckle
Harness Strap
Crotch Strap
Pad
Harness
Adjustment
Strap
Harness
Release Button
Chest Clip Pads
Recline
Adjustment Handle
Headrest
Adjustment Tab
Shoulder Pads
Recline Position
Indicator
Bubble Level
Indicator
Booster
Belt Path
Booster Shoulder
Belt Guide
Cup Holder
Cup Holder
Release Button
KidConsole
Padded Waist Belt
Chest Clip
Seat Body
Side Zipper
18
19
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT COMPONENTS CHILD RESTRAINT COMPONENTS
A
B
C
D
Tether Strap
Tether Strap Adjuster
Tether Hook
LATCH Adjuster (PULL 1
st
)
SuperCinch® LATCH Tightener (PULL 2
nd
)
LATCH Strap
LATCH Connectors
E
F
PULL
1
st
2
nd
PULL
D
G
A
B
C
F
G
E
Tether
LATCH
G
TETHER:
LATCH:
F
PULL
1
st
2
nd
PULL
18
19
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT COMPONENTS CHILD RESTRAINT COMPONENTS
A
B
C
D
Tether Strap
Tether Strap Adjuster
Tether Hook
LATCH Adjuster (PULL 1
st
)
SuperCinch® LATCH Tightener (PULL 2
nd
)
LATCH Strap
LATCH Connectors
E
F
PULL
1
st
2
nd
PULL
D
G
A
B
C
F
G
E
Tether
LATCH
G
TETHER:
LATCH:
F
PULL
1
st
2
nd
PULL
20
21
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
LATCH AND TETHER STORAGE LATCH AND TETHER STORAGE
3
2a
2
1
LATCH STORAGE:
1
Pull forward on the Seat Bottom Pad and compartment door at the
same time, to locate the LATCH Storage Compartment.
Store both LATCH straps in the compartment. Fold the LATCH straps
as shown (2a). Make sure the LATCH Storage Compartment is prop-
erly closed.
Always make sure LATCH components are properly
stored in the compartments when not in use.
TETHER STORAGE:
Store Tether in the compartment in the back of Child Restraint
when not in use. Attach Tether Hook onto bar and pull on strap to
remove slack. Make sure compartment door is properly closed.
3
2
20
21
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
LATCH AND TETHER STORAGE LATCH AND TETHER STORAGE
3
2a
2
1
LATCH STORAGE:
1
Pull forward on the Seat Bottom Pad and compartment door at the
same time, to locate the LATCH Storage Compartment.
Store both LATCH straps in the compartment. Fold the LATCH straps
as shown (2a). Make sure the LATCH Storage Compartment is prop-
erly closed.
Always make sure LATCH components are properly
stored in the compartments when not in use.
TETHER STORAGE:
Store Tether in the compartment in the back of Child Restraint
when not in use. Attach Tether Hook onto bar and pull on strap to
remove slack. Make sure compartment door is properly closed.
3
2
22
23
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
SELECT HARNESS MODE
WARNING! HARNESS MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because they are too small, select a different
child seat (select a rear facing child restraint). If the child is not within these
requirements because the child is too large, review the BOOSTER MODE
guidelines on page 25.
Use HARNESS MODE with children:
• Who are at least two years old.
• Who weigh between 25 and 65 lbs
(11.4 – 29.5 kg).
• Who are 54” (137 cm) tall or less.
• When Harness Straps can be positioned
at or above the child’s shoulders*.
See Harness Height
Adjustment on page 74.
SELECT HARNESS MODE
HARNESS MODE
25 lbs. 40 lbs. 65 lbs.
(11.4 kg) (18 kg) (29.5 kg)
NO LATCH
*
22
23
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
SELECT HARNESS MODE
WARNING! HARNESS MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because they are too small, select a different
child seat (select a rear facing child restraint). If the child is not within these
requirements because the child is too large, review the BOOSTER MODE
guidelines on page 25.
Use HARNESS MODE with children:
• Who are at least two years old.
• Who weigh between 25 and 65 lbs
(11.4 – 29.5 kg).
• Who are 54” (137 cm) tall or less.
• When Harness Straps can be positioned
at or above the child’s shoulders*.
See Harness Height
Adjustment on page 74.
SELECT HARNESS MODE
HARNESS MODE
25 lbs. 40 lbs. 65 lbs.
(11.4 kg) (18 kg) (29.5 kg)
NO LATCH
*
24
25
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
WARNING! BOOSTER MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because the child is too small, review the
HARNESS MODE guidelines on page 23.
SELECT BOOSTER MODE SELECT BOOSTER MODE
Use BOOSTER MODE with children:
• Who are at least four year old.
• Who weigh between 40 and 100 lbs
(18 – 45.3 kg).
• Who are 38” to 57” (97 - 145 cm) tall.
• Who demonstrate an ability to sit relatively still
and properly in a seat belt at all times.
See Adjusting Shoulder Belt
Guide Height on page 100.
BOOSTER MODE
40 lbs. 100 lbs.
(18 kg) (45.3 kg)
24
25
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
WARNING! BOOSTER MODE use of this Child Restraint is ONLY for
children who meet ALL of the requirements shown here. If the child is not
within these requirements because the child is too small, review the
HARNESS MODE guidelines on page 23.
SELECT BOOSTER MODE SELECT BOOSTER MODE
Use BOOSTER MODE with children:
• Who are at least four year old.
• Who weigh between 40 and 100 lbs
(18 – 45.3 kg).
• Who are 38” to 57” (97 - 145 cm) tall.
• Who demonstrate an ability to sit relatively still
and properly in a seat belt at all times.
See Adjusting Shoulder Belt
Guide Height on page 100.
BOOSTER MODE
40 lbs. 100 lbs.
(18 kg) (45.3 kg)
26
27
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
ADJUSTING CROTCH STRAP ADJUSTING CROTCH STRAP
2b
2c
Undo the Chest Clip and Buckle Tongues. Remove Crotch Strap Pad
(see page 92). Lift up on the Seat Bottom Pad, undo both elastic straps
attached to the Latch Storage Compartment (1a). Close the LATCH
Storage Compartment to access the Crotch Strap adjustment/storage
area. Pull the Crotch Strap through the slot on the Seat Bottom pad.
With the Crotch Strap in Position 1 (2a), guide the Crotch Strap forward
through the Crotch Strap Compartment (2b) and pull the Crotch Strap
into Position 2 (2c). Thread Crotch Strap through the correct crotch
strap opening and reposition the Seat Bottom pad. Reverse this step to
move the Crotch Strap back to Position 1.
1
2
1
1a
2a
26
27
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
ADJUSTING CROTCH STRAP ADJUSTING CROTCH STRAP
2b
2c
Undo the Chest Clip and Buckle Tongues. Remove Crotch Strap Pad
(see page 92). Lift up on the Seat Bottom Pad, undo both elastic straps
attached to the Latch Storage Compartment (1a). Close the LATCH
Storage Compartment to access the Crotch Strap adjustment/storage
area. Pull the Crotch Strap through the slot on the Seat Bottom pad.
With the Crotch Strap in Position 1 (2a), guide the Crotch Strap forward
through the Crotch Strap Compartment (2b) and pull the Crotch Strap
into Position 2 (2c). Thread Crotch Strap through the correct crotch
strap opening and reposition the Seat Bottom pad. Reverse this step to
move the Crotch Strap back to Position 1.
1
2
1
1a
2a
28
29
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
Correctly fit the Child Restraint to your child by adjusting the Headrest.
Pull up on the Headrest Adjustment Tab located on the back of the Child
Restraint, and adjust the Headrest up or down.
Make sure the Headrest is locked into position. Release the Headrest
Adjustment Tab and slightly raise/lower the Headrest until you hear a
click, indicating that the Headrest is locked into position.
2
1
The Headrest has 9 height positions to allow the Child Restraint to grow with
your child. Ensure that the child’s head is positioned correctly within the
Headrest and that the Shoulder Belt is positioned correctly at or just above
the child’s shoulders.
1
ADJUSTING HEADREST ADJUSTING HEADREST
“CLICK”
2
28
29
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
Correctly fit the Child Restraint to your child by adjusting the Headrest.
Pull up on the Headrest Adjustment Tab located on the back of the Child
Restraint, and adjust the Headrest up or down.
Make sure the Headrest is locked into position. Release the Headrest
Adjustment Tab and slightly raise/lower the Headrest until you hear a
click, indicating that the Headrest is locked into position.
2
1
The Headrest has 9 height positions to allow the Child Restraint to grow with
your child. Ensure that the child’s head is positioned correctly within the
Headrest and that the Shoulder Belt is positioned correctly at or just above
the child’s shoulders.
1
ADJUSTING HEADREST ADJUSTING HEADREST
“CLICK”
2
30
31
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
1
2
3
4
1
2
3
4
1a
Squeeze the Recline Adjustment Handle on the front of the Child
Restraint and adjust to an upright or reclined position, as desired (1a).
Make sure the seat is in a locked position and that the bubble level is
between the lines for the appropriate installation mode.
ADJUSTING RECLINE ADJUSTING RECLINE
1
1
30
31
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
1
2
3
4
1
2
3
4
1a
Squeeze the Recline Adjustment Handle on the front of the Child
Restraint and adjust to an upright or reclined position, as desired (1a).
Make sure the seat is in a locked position and that the bubble level is
between the lines for the appropriate installation mode.
ADJUSTING RECLINE ADJUSTING RECLINE
1
1
32
33
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CUP HOLDER CUP HOLDER
WARNING - Do NOT use Cup Holder to hold hot liquids.
PLASTIC CONTAINERS ONLY - No glass or metal containers. Only
use cups with less than 12 oz. (355 ml) capacity. Never place sharp
or pointed objects in Cup Holder. In a crash these objects could hit
you or your child and cause serious injuries.
R
L
R
R
1
2
Lip
ATTACHING THE CUP HOLDER:
Match the “R” and “L” Cup Holders to the Child Restraint, as shown.
Slide the Cup Holder into the Child Restraint. Make sure the Cup Holder
Lip fits behind the groove on the Child Restraint, as shown. Push down
on the Cup Holder until it clicks into place. Repeat for the other side.
REMOVING THE CUP HOLDER
To remove, press the button located on the bottom edge of the Cup
Holder. Lift up to remove.
3
1
2
32
33
CHILD RESTRAINT OVERVIEW
CHILD RESTRAINT OVERVIEW
CUP HOLDER CUP HOLDER
WARNING - Do NOT use Cup Holder to hold hot liquids.
PLASTIC CONTAINERS ONLY - No glass or metal containers. Only
use cups with less than 12 oz. (355 ml) capacity. Never place sharp
or pointed objects in Cup Holder. In a crash these objects could hit
you or your child and cause serious injuries.
R
L
R
R
1
2
Lip
ATTACHING THE CUP HOLDER:
Match the “R” and “L” Cup Holders to the Child Restraint, as shown.
Slide the Cup Holder into the Child Restraint. Make sure the Cup Holder
Lip fits behind the groove on the Child Restraint, as shown. Push down
on the Cup Holder until it clicks into place. Repeat for the other side.
REMOVING THE CUP HOLDER
To remove, press the button located on the bottom edge of the Cup
Holder. Lift up to remove.
3
1
2
35
VEHICLE INFORMATION
34
VEHICLE INFORMATION
VEHICLE SEATING POSITIONS
Some vehicles have no seating
positions which are compatible
with this Child Restraint. If in
doubt, contact the vehicle
manufacturer for assistance.
Only forward-facing vehicle
seats should be used with this
Child Restraint.
Make sure no more than 3 inches
of the Child Restraint base is past
the edge of the vehicle seat.
Do not use on a folded
down vehicle seat back.
When using the seat in BOOSTER MODE,
always install in a vehicle seat with a
3-point seat belt (shoulder belt and lap
belt). NEVER use lap belt only.
VEHICLE SEATING POSITIONS
The back seat is the safest place for children 12 and under. See your vehicle
owner’s manual for Booster Seat installation and instructions.
WARNING! WHEN USING THIS CHILD RESTRAINT, DO NOT PLACE
THIS CHILD RESTRAINT IN A VEHICLE SEATING LOCATION WITH A
FRONTAL AIR BAG, UNLESS THE AIR BAG CAN BE TURNED OFF.
35
VEHICLE INFORMATION
34
VEHICLE INFORMATION
VEHICLE SEATING POSITIONS
Some vehicles have no seating
positions which are compatible
with this Child Restraint. If in
doubt, contact the vehicle
manufacturer for assistance.
Only forward-facing vehicle
seats should be used with this
Child Restraint.
Make sure no more than 3 inches
of the Child Restraint base is past
the edge of the vehicle seat.
Do not use on a folded
down vehicle seat back.
When using the seat in BOOSTER MODE,
always install in a vehicle seat with a
3-point seat belt (shoulder belt and lap
belt). NEVER use lap belt only.
VEHICLE SEATING POSITIONS
The back seat is the safest place for children 12 and under. See your vehicle
owner’s manual for Booster Seat installation and instructions.
WARNING! WHEN USING THIS CHILD RESTRAINT, DO NOT PLACE
THIS CHILD RESTRAINT IN A VEHICLE SEATING LOCATION WITH A
FRONTAL AIR BAG, UNLESS THE AIR BAG CAN BE TURNED OFF.
37
VEHICLE INFORMATION
36
VEHICLE INFORMATION
VEHICLE SEAT BELTS - HARNESS MODE
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in HARNESS MODE.
If any of the belt types listed below are in the chosen
seating position, choose another vehicle seating position OR use LATCH if available.
1 2 3
4
1. Motorized (automatic) vehicle belts.
2. Door mounted vehicle belts. 5. Inflatable seat belts.
4. Non-Locking (ELR) Lap Belts.
3. Lap-shoulder Belts with 2 retractors (unless Lap Belt has a “Lock Mode”).
5
VEHICLE SEAT BELTS - HARNESS MODE
Vehicle seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s
manual for specific information about seat belts and their use with Child
Restraints. For simplest installation use LATCH - Refer to page 40 for details.
Shoulder belt with switchable retractor:
Putting the shoulder belt in the locked/switched mode as the last step is
optional. The shoulder belt Lock-Off replaces the need for the locked/
switched mode.
The information in this section only applies to installation with vehicle seat belts in
HARNESS MODE
.
37
VEHICLE INFORMATION
36
VEHICLE INFORMATION
VEHICLE SEAT BELTS - HARNESS MODE
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in HARNESS MODE.
If any of the belt types listed below are in the chosen
seating position, choose another vehicle seating position OR use LATCH if available.
1 2 3
4
1. Motorized (automatic) vehicle belts.
2. Door mounted vehicle belts. 5. Inflatable seat belts.
4. Non-Locking (ELR) Lap Belts.
3. Lap-shoulder Belts with 2 retractors (unless Lap Belt has a “Lock Mode”).
5
VEHICLE SEAT BELTS - HARNESS MODE
Vehicle seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s
manual for specific information about seat belts and their use with Child
Restraints. For simplest installation use LATCH - Refer to page 40 for details.
Shoulder belt with switchable retractor:
Putting the shoulder belt in the locked/switched mode as the last step is
optional. The shoulder belt Lock-Off replaces the need for the locked/
switched mode.
The information in this section only applies to installation with vehicle seat belts in
HARNESS MODE
.
39
VEHICLE INFORMATION
38
VEHICLE INFORMATION
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in BOOSTER MODE.
If any of the belt types listed below are in the chosen seating position, you
must choose another vehicle seating position.
1 2 3
VEHICLE SEAT BELTS - BOOSTER MODEVEHICLE SEAT BELTS - BOOSTER MODE
Shoulder belt with switchable retractor:
Refer to your vehicle owner’s manual for information regarding switchable
retractors and Booster Seat use.
Inflatable seat belts:
Refer to your vehicle owner’s manual for instructions for use with this
Booster Seat.
The information in this section only applies to installation with vehicle seat belts in
BOOSTER MODE
.
1. Never use a Lap Belt with motorized
Shoulder belt.
2. Never use vehicle belts that are
attached to the door or that move
along a track.
3. Never use any type of Lap-Only
Belt.
39
VEHICLE INFORMATION
38
VEHICLE INFORMATION
The following types of vehicle belts MUST NOT be used to install this Child
Restraint in BOOSTER MODE.
If any of the belt types listed below are in the chosen seating position, you
must choose another vehicle seating position.
1 2 3
VEHICLE SEAT BELTS - BOOSTER MODEVEHICLE SEAT BELTS - BOOSTER MODE
Shoulder belt with switchable retractor:
Refer to your vehicle owner’s manual for information regarding switchable
retractors and Booster Seat use.
Inflatable seat belts:
Refer to your vehicle owner’s manual for instructions for use with this
Booster Seat.
The information in this section only applies to installation with vehicle seat belts in
BOOSTER MODE
.
1. Never use a Lap Belt with motorized
Shoulder belt.
2. Never use vehicle belts that are
attached to the door or that move
along a track.
3. Never use any type of Lap-Only
Belt.
41
VEHICLE INFORMATION
40
VEHICLE INFORMATION
WHAT IS LATCH?
Vehicle
Top Tether Anchor
Points
Vehicle
Lower Anchor
Points
Vehicle
Seat Crease
(Fig. a) (Fig. b) (Fig. c)
WHAT IS LATCH?
LATCH = Lower Anchors and Tethers for CHildren
United States Motor Vehicle Safety Standards have defined a system for installing
Child Restraints in vehicles called LATCH. In Harness Mode, LATCH may ONLY
be used IN PLACE OF vehicle belt if the vehicle is equipped with LATCH anchor
points. DO NOT use both the seat belt and LATCH at the same time. Please
refer to the vehicle owner’s manual for designated LATCH locations in vehicles.
LATCH in the vehicle consists of a top tether anchor point and two lower anchor
points. Some vehicle owner’s manuals use the term “ISOFIX”. LATCH can also be
used in vehicle seating positions equipped with ISOFIX.
If the vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at
the seat crease. If not visible, the seating position may be marked with a symbol (fig. a) or
a colored dot. Check the vehicle owner’s manual for vehicle top tether anchor locations.
They may be identified using one of the anchor symbols (fig. b or fig. c).
WARNING: This Child Restraint is designed to be used with
lower LATCH anchors at the standard spacing (11 inches (28 cm))
ONLY! Refer to vehicle owner’s manual for information about
LATCH and Child Restraint installation positions.
41
VEHICLE INFORMATION
40
VEHICLE INFORMATION
WHAT IS LATCH?
Vehicle
Top Tether Anchor
Points
Vehicle
Lower Anchor
Points
Vehicle
Seat Crease
(Fig. a) (Fig. b) (Fig. c)
WHAT IS LATCH?
LATCH = Lower Anchors and Tethers for CHildren
United States Motor Vehicle Safety Standards have defined a system for installing
Child Restraints in vehicles called LATCH. In Harness Mode, LATCH may ONLY
be used IN PLACE OF vehicle belt if the vehicle is equipped with LATCH anchor
points. DO NOT use both the seat belt and LATCH at the same time. Please
refer to the vehicle owner’s manual for designated LATCH locations in vehicles.
LATCH in the vehicle consists of a top tether anchor point and two lower anchor
points. Some vehicle owner’s manuals use the term “ISOFIX”. LATCH can also be
used in vehicle seating positions equipped with ISOFIX.
If the vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at
the seat crease. If not visible, the seating position may be marked with a symbol (fig. a) or
a colored dot. Check the vehicle owner’s manual for vehicle top tether anchor locations.
They may be identified using one of the anchor symbols (fig. b or fig. c).
WARNING: This Child Restraint is designed to be used with
lower LATCH anchors at the standard spacing (11 inches (28 cm))
ONLY! Refer to vehicle owner’s manual for information about
LATCH and Child Restraint installation positions.
43
VEHICLE INFORMATION
42
VEHICLE INFORMATION
WHAT IS A TETHER?WHAT IS A TETHER?
Tether anchor locations vary from vehicle to vehicle. Check
your vehicle owner’s manual and look for the tether anchor
symbol as shown. A tether reduces movement of a forward
facing child restraint in a crash and helps to achieve a tight
installation.
Vehicle tether anchors can be found in many different locations. Some
of the typical locations are shown here. Refer to your vehicle owner’s
manual for exact locations, anchor identification, and requirements.
Rear Shelf
Back Wall
Back of Seat
Vehicle Floor
Vehicle Roof
43
VEHICLE INFORMATION
42
VEHICLE INFORMATION
WHAT IS A TETHER?WHAT IS A TETHER?
Tether anchor locations vary from vehicle to vehicle. Check
your vehicle owner’s manual and look for the tether anchor
symbol as shown. A tether reduces movement of a forward
facing child restraint in a crash and helps to achieve a tight
installation.
Vehicle tether anchors can be found in many different locations. Some
of the typical locations are shown here. Refer to your vehicle owner’s
manual for exact locations, anchor identification, and requirements.
Rear Shelf
Back Wall
Back of Seat
Vehicle Floor
Vehicle Roof
44
45
HARNESS MODE
HARNESS MODE
HARNESS SETUP
IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing
the Child Restraint in the vehicle, remove Tether from the Tether
Compartment. If a tether anchor is not available, the Tether
should be stored properly (See page 20).
See page 34 for “Vehicle Seating Positions” before installing. Make sure
the vehicle is on a level surface, if possible.
LEVEL
SLO PE
2
1
HARNESS SETUP
1
TILT
44
45
HARNESS MODE
HARNESS MODE
HARNESS SETUP
IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing
the Child Restraint in the vehicle, remove Tether from the Tether
Compartment. If a tether anchor is not available, the Tether
should be stored properly (See page 20).
See page 34 for “Vehicle Seating Positions” before installing. Make sure
the vehicle is on a level surface, if possible.
LEVEL
SLO PE
2
1
HARNESS SETUP
1
TILT
46
47
HARNESS MODE
HARNESS MODE
HARNESS SETUP
Place the Child Restraint on the vehicle seat making sure the installation
lines (located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Child Restraint.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
4
3
HARNESS SETUP
4
Installation
Lines
Vehicle
Seating
Surface
3
46
47
HARNESS MODE
HARNESS MODE
HARNESS SETUP
Place the Child Restraint on the vehicle seat making sure the installation
lines (located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Child Restraint.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
4
3
HARNESS SETUP
4
Installation
Lines
Vehicle
Seating
Surface
3
48
49
HARNESS MODE
HARNESS MODE
HARNESS SETUPHARNESS SETUP
With the Child Restraint facing forward on selected vehicle seat; make
sure it is not blocking the vehicle belt buckle. Lay Tether Strap over
the back of the vehicle seat.
6
5
• LATCH installation continued on page 50.
• Lap-Shoulder Belt installation continued on page 58.
• Lap Belt Only installation continued on page 64.
Installation Options:
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, adjust the seat
recline to position 3 or position 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
Check to make sure the install line has remained parallel to the vehicle
seating surface (see step 3 pg. 47).
7
5
6
L E V EL
SLOPE
6
1
2
3
4
L E V EL
SLOPE
48
49
HARNESS MODE
HARNESS MODE
HARNESS SETUPHARNESS SETUP
With the Child Restraint facing forward on selected vehicle seat; make
sure it is not blocking the vehicle belt buckle. Lay Tether Strap over
the back of the vehicle seat.
6
5
• LATCH installation continued on page 50.
• Lap-Shoulder Belt installation continued on page 58.
• Lap Belt Only installation continued on page 64.
Installation Options:
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, adjust the seat
recline to position 3 or position 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
Check to make sure the install line has remained parallel to the vehicle
seating surface (see step 3 pg. 47).
7
5
6
L E V EL
SLOPE
6
1
2
3
4
L E V EL
SLOPE
50
51
HARNESS MODE
HARNESS MODE
INSTALL USING LATCH
3
INSTALL USING LATCH
If LATCH anchors are out and in correct position skip to Step 6 (pg 54).
Lift the Zip-On Head Rest pad out of the way.
Unzip the side of the Seat Pad and flip open.
Pull forward on the Seat Bottom Pad and storage cover, to locate the
LATCH storage compartment. Remove LATCH Straps.
2
1
Do not use the LATCH anchors of the child restraint anchorage system with
the internal harness of the child restraint when restraining a child weighing
more than 40 lbs (18 kg). Always use the Top Tether.
When installing with LATCH in vehicle equipped with inflatable seat
belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.
3
1
2
50
51
HARNESS MODE
HARNESS MODE
INSTALL USING LATCH
3
INSTALL USING LATCH
If LATCH anchors are out and in correct position skip to Step 6 (pg 54).
Lift the Zip-On Head Rest pad out of the way.
Unzip the side of the Seat Pad and flip open.
Pull forward on the Seat Bottom Pad and storage cover, to locate the
LATCH storage compartment. Remove LATCH Straps.
2
1
Do not use the LATCH anchors of the child restraint anchorage system with
the internal harness of the child restraint when restraining a child weighing
more than 40 lbs (18 kg). Always use the Top Tether.
When installing with LATCH in vehicle equipped with inflatable seat
belts, the unused seat belt should NOT be buckled behind the Child
Restraint System as this will engage the inflatable portion of the belt.
3
1
2
52
53
HARNESS MODE
HARNESS MODE
INSTALL USING LATCH
4
5b
Make sure SuperCinch
®
LATCH Tightener strap
(Pull 2
nd
) is loosened to
the full length.
Make sure
LATCH Adjuster strap
(Pull 1
st
) is loosened
to the full length.
5a
5b
INSTALL USING LATCH
Thread the LATCH Connectors behind the seat fabric and out the side
openings on the seat back, as shown.
Loosen the SuperCinch
®
LATCH Tightener strap (Pull 2
nd
) and LATCH
Adjuster strap (Pull 1
st
) to their full length.
Make sure the LATCH straps lay flat against the seat back (5a). If the
straps are twisted they will not move freely from side to side. Then
close the LATCH Connector Storage compartment door and replace
seat pads (5b). Make sure to re-attach zipper on the Backrest Seat Pad.
5
4
5b
52
53
HARNESS MODE
HARNESS MODE
INSTALL USING LATCH
4
5b
Make sure SuperCinch
®
LATCH Tightener strap
(Pull 2
nd
) is loosened to
the full length.
Make sure
LATCH Adjuster strap
(Pull 1
st
) is loosened
to the full length.
5a
5b
INSTALL USING LATCH
Thread the LATCH Connectors behind the seat fabric and out the side
openings on the seat back, as shown.
Loosen the SuperCinch
®
LATCH Tightener strap (Pull 2
nd
) and LATCH
Adjuster strap (Pull 1
st
) to their full length.
Make sure the LATCH straps lay flat against the seat back (5a). If the
straps are twisted they will not move freely from side to side. Then
close the LATCH Connector Storage compartment door and replace
seat pads (5b). Make sure to re-attach zipper on the Backrest Seat Pad.
5
4
5b
54
55
HARNESS MODE
HARNESS MODE
6
INSTALL USING LATCH
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
“CLICK”
“CLICK”
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
8
7
7
8
INSTALL USING LATCH
Do not install by this method for a
child weighing more than 40lbs (18kg).
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars.
Pull up on the end of the LATCH Adjuster strap (Pull 1
st
) until strap is
tight.
Pull on the SuperCinch
®
LATCH Tightener strap (Pull 2
nd
) to
secure Child Restraint.
6
Reminder: If using Tether Strap, make sure to lay it over the seat before installing in
LATCH mode. “IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing the
Child Restraint in the vehicle, remove Tether from the tether compartment. If a tether
anchor is not available, the Tether should be stored properly.”
54
55
HARNESS MODE
HARNESS MODE
6
INSTALL USING LATCH
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
“CLICK”
“CLICK”
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
8
7
7
8
INSTALL USING LATCH
Do not install by this method for a
child weighing more than 40lbs (18kg).
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars.
Pull up on the end of the LATCH Adjuster strap (Pull 1
st
) until strap is
tight.
Pull on the SuperCinch
®
LATCH Tightener strap (Pull 2
nd
) to
secure Child Restraint.
6
Reminder: If using Tether Strap, make sure to lay it over the seat before installing in
LATCH mode. “IF TETHER ANCHOR IS AVAILABLE IN YOUR VEHICLE - Before placing the
Child Restraint in the vehicle, remove Tether from the tether compartment. If a tether
anchor is not available, the Tether should be stored properly.”
56
57
HARNESS MODE
HARNESS MODE
9
INSTALL USING LATCH
CHECK YOUR WORK
Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1” (25 mm)
from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the LATCH and
Tether Straps, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
Locate Tether Anchor in your vehicle. Attach Tether Hook and pull Tether
Adjuster strap to tighten.
9
INSTALL USING LATCH
56
57
HARNESS MODE
HARNESS MODE
9
INSTALL USING LATCH
CHECK YOUR WORK
Hold Child Restraint at each side near forward-facing vehicle belt path. Pull side
to side and forward. Child Restraint should not move more than 1” (25 mm)
from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the LATCH and
Tether Straps, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
Locate Tether Anchor in your vehicle. Attach Tether Hook and pull Tether
Adjuster strap to tighten.
9
INSTALL USING LATCH
58
59
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
INSTALL USING LAP-SHOULDER BELT
Lift the Zip-On Head Rest Pad out of the way. Unzip the side of the
Seat Pad and flip open.
Route vehicle lap-shoulder belt through the red HARNESS MODE
seat belt path on the side of Child Restraint.
1
2
1
2
58
59
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
INSTALL USING LAP-SHOULDER BELT
Lift the Zip-On Head Rest Pad out of the way. Unzip the side of the
Seat Pad and flip open.
Route vehicle lap-shoulder belt through the red HARNESS MODE
seat belt path on the side of Child Restraint.
1
2
1
2
60
61
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
INSTALL USING LAP-SHOULDER BELT
Pass the vehicle belt along the back of the Child Restraint and pull the
vehicle belt down through the red HARNESS MODE seat belt path on
the opposite side of the Child Restraint.
Buckle the vehicle belt. Make sure to re-attach zipper on the Backrest
Seat Pad and flip the Zip-On Head Rest Pad back in place.
3
4
43
“CLICK”
60
61
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
INSTALL USING LAP-SHOULDER BELT
Pass the vehicle belt along the back of the Child Restraint and pull the
vehicle belt down through the red HARNESS MODE seat belt path on
the opposite side of the Child Restraint.
Buckle the vehicle belt. Make sure to re-attach zipper on the Backrest
Seat Pad and flip the Zip-On Head Rest Pad back in place.
3
4
43
“CLICK”
62
63
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
While pushing down on the Child Restraint (5a) pull the vehicle shoulder
belt (5b) to tighten vehicle lap belt.
While still pulling the shoulder belt tight, slide the vehicle shoulder belt
into the Lock-Off. Always use the Lock-Off on the opposite side of the
vehicle belt buckle.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
5
6
INSTALL USING LAP-SHOULDER BELT
7
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
1
2
3
4
5a
5b
6
7
62
63
HARNESS MODE
HARNESS MODE
INSTALL USING LAP-SHOULDER BELT
While pushing down on the Child Restraint (5a) pull the vehicle shoulder
belt (5b) to tighten vehicle lap belt.
While still pulling the shoulder belt tight, slide the vehicle shoulder belt
into the Lock-Off. Always use the Lock-Off on the opposite side of the
vehicle belt buckle.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
5
6
INSTALL USING LAP-SHOULDER BELT
7
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
1
2
3
4
5a
5b
6
7
64
65
HARNESS MODE
HARNESS MODE
INSTALL USING LAP BELT ONLY
Lift the Zip-On Head Rest Pad out of the way. Unzip the side of the
Seat Pad and flip open.
Route vehicle lap belt through the red HARNESS MODE seat belt
path on the side of Child Restraint.
1
INSTALL USING LAP BELT ONLY
2
2
1
64
65
HARNESS MODE
HARNESS MODE
INSTALL USING LAP BELT ONLY
Lift the Zip-On Head Rest Pad out of the way. Unzip the side of the
Seat Pad and flip open.
Route vehicle lap belt through the red HARNESS MODE seat belt
path on the side of Child Restraint.
1
INSTALL USING LAP BELT ONLY
2
2
1
66
67
HARNESS MODE
HARNESS MODE
INSTALL USING LAP BELT ONLY
Pass the vehicle belt along the back of the Child Restraint and pull the
vehicle belt down through the red HARNESS MODE seat belt path on
the opposite side of the Child Restraint.
Buckle the vehicle belt. Make sure to re-attach zipper on the Backrest
Seat Pad and flip the Zip-On Head Rest Pad back in place.
3
INSTALL USING LAP BELT ONLY
4
3 4
“CLICK”
66
67
HARNESS MODE
HARNESS MODE
INSTALL USING LAP BELT ONLY
Pass the vehicle belt along the back of the Child Restraint and pull the
vehicle belt down through the red HARNESS MODE seat belt path on
the opposite side of the Child Restraint.
Buckle the vehicle belt. Make sure to re-attach zipper on the Backrest
Seat Pad and flip the Zip-On Head Rest Pad back in place.
3
INSTALL USING LAP BELT ONLY
4
3 4
“CLICK”
68
69
HARNESS MODE
HARNESS MODE
INSTALL USING LAP BELT ONLY
While pushing down on the Child Restraint (5a) pull the loose end of
the vehicle lap belt (5b) to tighten.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
6
5
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
INSTALL USING LAP BELT ONLY
5a
5b
6
68
69
HARNESS MODE
HARNESS MODE
INSTALL USING LAP BELT ONLY
While pushing down on the Child Restraint (5a) pull the loose end of
the vehicle lap belt (5b) to tighten.
Locate Tether anchor in your vehicle. Attach Tether Hook. Pull Tether
Adjuster strap to tighten.
6
5
CHECK YOUR WORK
Hold Child Restraint at each side near FORWARD-FACING vehicle belt path. Pull
side to side and forward. Vehicle belt should remain tight and Child Restraint
should not move more than 1” (25 mm) from vehicle seat back or side-to-side.
Make sure Bubble is between lines on label. If necessary, loosen the vehicle belt
and Tether, re-adjust recline and repeat installation steps to make sure Child
Restraint is installed properly.
Check installation before every use!
INSTALL USING LAP BELT ONLY
5a
5b
6
70
71
HARNESS MODE
HARNESS MODE
3
2
1
SECURING CHILD WITH HARNESS
Locate the Harness Release Button behind the seat pad slot on the front
of the Child Restraint, as shown. At the same time pull out on both of
the Harness Straps.
Unbuckle Harness by pressing the button on Harness Buckle and pulling
out both Buckle Tongues.
Open Chest Clip by squeezing both buttons in the middle of the clip and
pulling apart.
1
2
3
If Crotch Strap is under child, it will need to be re-positioned. Refer to
page 26 “Adjusting Crotch Strap”.
SECURING CHILD WITH HARNESS
70
71
HARNESS MODE
HARNESS MODE
3
2
1
SECURING CHILD WITH HARNESS
Locate the Harness Release Button behind the seat pad slot on the front
of the Child Restraint, as shown. At the same time pull out on both of
the Harness Straps.
Unbuckle Harness by pressing the button on Harness Buckle and pulling
out both Buckle Tongues.
Open Chest Clip by squeezing both buttons in the middle of the clip and
pulling apart.
1
2
3
If Crotch Strap is under child, it will need to be re-positioned. Refer to
page 26 “Adjusting Crotch Strap”.
SECURING CHILD WITH HARNESS
72
73
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
Place child in Child Restraint with child’s back flat against the back of the
seat. Pull Harness Straps over the child’s shoulders and around the child’s
waist. Make sure there are no twists in Harness Strap.
4
Clothing, such as bulky winter coats that interfere with the proper placement or
adjustment of the Harness system should never be used. Make sure the Harness
Straps lie flat on the child’s shoulders, are adjusted snugly so that clothing is
compressed and the child cannot lean forward, and the Chest Clip is at arm level.
SECURING CHILD WITH HARNESS
4
72
73
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
Place child in Child Restraint with child’s back flat against the back of the
seat. Pull Harness Straps over the child’s shoulders and around the child’s
waist. Make sure there are no twists in Harness Strap.
4
Clothing, such as bulky winter coats that interfere with the proper placement or
adjustment of the Harness system should never be used. Make sure the Harness
Straps lie flat on the child’s shoulders, are adjusted snugly so that clothing is
compressed and the child cannot lean forward, and the Chest Clip is at arm level.
SECURING CHILD WITH HARNESS
4
74
75
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
SECURING CHILD WITH HARNESS
5
*
*
AT OR ABOVE
Adjust Harness Strap height position up or down by pulling up on
the Headrest Adjustment Tab on the back of the Child Restraint and
moving the Headrest up or down. Position the Harness Straps at or
just above the child’s shoulders.
Make sure Headrest locks into position before tightening Harness.
5
Harness may need to be loosened to move the Headrest up.
74
75
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
SECURING CHILD WITH HARNESS
5
*
*
AT OR ABOVE
Adjust Harness Strap height position up or down by pulling up on
the Headrest Adjustment Tab on the back of the Child Restraint and
moving the Headrest up or down. Position the Harness Straps at or
just above the child’s shoulders.
Make sure Headrest locks into position before tightening Harness.
5
Harness may need to be loosened to move the Headrest up.
76
77
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
Insert each Buckle Tongue into Harness Buckle; listen for a click (6a).
Pull up firmly on both Buckle Tongues to make sure that they are
securely latched (6b).
6
SECURING CHILD WITH HARNESS
“CLICK”
6b
6a
76
77
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
Insert each Buckle Tongue into Harness Buckle; listen for a click (6a).
Pull up firmly on both Buckle Tongues to make sure that they are
securely latched (6b).
6
SECURING CHILD WITH HARNESS
“CLICK”
6b
6a
78
79
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
SECURING CHILD WITH HARNESS
Fasten Chest Clip by snapping both sides together; listen for a click.
Push Chest Clip, Chest Clip Pads and Shoulder Pads down away from
the child’s neck and towards the Harness Buckle. Remove slack from
the waist strap and pull up on both shoulder straps.
7
8
WARNING - Chest Clip Pads must always be used in HARNESS
MODE. Damaged or removed Chest Clip Pads could result in serious
injury or death.
“CLICK”
7 8
78
79
HARNESS MODE
HARNESS MODE
SECURING CHILD WITH HARNESS
SECURING CHILD WITH HARNESS
Fasten Chest Clip by snapping both sides together; listen for a click.
Push Chest Clip, Chest Clip Pads and Shoulder Pads down away from
the child’s neck and towards the Harness Buckle. Remove slack from
the waist strap and pull up on both shoulder straps.
7
8
WARNING - Chest Clip Pads must always be used in HARNESS
MODE. Damaged or removed Chest Clip Pads could result in serious
injury or death.
“CLICK”
7 8
80
81
HARNESS MODE
HARNESS MODE
10
SECURING CHILD WITH HARNESS
Tighten the harness by pulling slowly on Harness Adjustment Strap until
the harness is snug on child (9a). If you can pinch a fold in the strap at
the child’s shoulders, harness is too loose (9b). If the harness is too loose
pull the Harness Adjuster strap more.
Move the Shoulder Pads up to the child’s shoulders. Slide Chest Clip and
Chest Clip Pads up to center of child’s chest, level with the armpits.
9
10
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD WITH HARNESS
9a
9b
80
81
HARNESS MODE
HARNESS MODE
10
SECURING CHILD WITH HARNESS
Tighten the harness by pulling slowly on Harness Adjustment Strap until
the harness is snug on child (9a). If you can pinch a fold in the strap at
the child’s shoulders, harness is too loose (9b). If the harness is too loose
pull the Harness Adjuster strap more.
Move the Shoulder Pads up to the child’s shoulders. Slide Chest Clip and
Chest Clip Pads up to center of child’s chest, level with the armpits.
9
10
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD WITH HARNESS
9a
9b
82
83
HARNESS MODE
HARNESS MODE
Check the position of Chest Clip: Chest Clip should be centered on the child’s chest, level
with the armpits.
Never secure child in Child Restraint with child dressed in bulky garments or heavy clothing.
Heavy clothing can prevent harness from being properly tightened around child.
Never secure child in Child Restraint with child wrapped in a blanket. To keep child warm,
place a blanket over child AFTER you have properly secured and tightened harness around
child.
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD CHECKLIST
Harness Straps must be snug. If you can pinch a fold in the strap, the harness is too loose. A
snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child’s flesh or push the child’s body into an unnatural position.
Straps must lay flat, free of twists and centered on top of the child’s shoulders.
Check the height of the Harness Straps: Make sure to position the Harness Straps at or
above the child’s shoulders.
*
*
AT OR ABOVE
SECURING CHILD CHECKLIST
82
83
HARNESS MODE
HARNESS MODE
Check the position of Chest Clip: Chest Clip should be centered on the child’s chest, level
with the armpits.
Never secure child in Child Restraint with child dressed in bulky garments or heavy clothing.
Heavy clothing can prevent harness from being properly tightened around child.
Never secure child in Child Restraint with child wrapped in a blanket. To keep child warm,
place a blanket over child AFTER you have properly secured and tightened harness around
child.
WARNING - If harness is not snug around your child, child could be
ejected in a sudden stop or crash resulting in serious injury or death.
SECURING CHILD CHECKLIST
Harness Straps must be snug. If you can pinch a fold in the strap, the harness is too loose. A
snug strap should not allow any slack. It lies in a relatively straight line without sagging. It
does not press on the child’s flesh or push the child’s body into an unnatural position.
Straps must lay flat, free of twists and centered on top of the child’s shoulders.
Check the height of the Harness Straps: Make sure to position the Harness Straps at or
above the child’s shoulders.
*
*
AT OR ABOVE
SECURING CHILD CHECKLIST
84
85
BOOSTER MODE
BOOSTER MODE
2b
BOOSTER SEAT SETUP
1
2a
Completely loosen Harness by pressing Harness Release Button on
the front of the Child Restraint and pulling out on both of the Harness
Straps as far as possible. Then unbuckle the Chest Clip and Harness
Buckle.
Undo the hook and loop fasteners and remove BOTH Padded Waist
Belt pads (2a & 2b).
BOOSTER SEAT SETUP
1
2
Store the Harness Straps and Crotch Strap properly when using the Child
Restraint in BOOSTER MODE.
84
85
BOOSTER MODE
BOOSTER MODE
2b
BOOSTER SEAT SETUP
1
2a
Completely loosen Harness by pressing Harness Release Button on
the front of the Child Restraint and pulling out on both of the Harness
Straps as far as possible. Then unbuckle the Chest Clip and Harness
Buckle.
Undo the hook and loop fasteners and remove BOTH Padded Waist
Belt pads (2a & 2b).
BOOSTER SEAT SETUP
1
2
Store the Harness Straps and Crotch Strap properly when using the Child
Restraint in BOOSTER MODE.
86
87
BOOSTER MODE
BOOSTER MODE
Unbuckle Chest Clip and lift the Zip-On Head Rest Pad out of the way.
Unzip the side of the Seat Pad and flip open (4a). Lift up on
bottom Backrest Seat Pad and move it out of the way (4b).
BOOSTER SEAT SETUP
3
4
BOOSTER SEAT SETUP
3
4a
4b
86
87
BOOSTER MODE
BOOSTER MODE
Unbuckle Chest Clip and lift the Zip-On Head Rest Pad out of the way.
Unzip the side of the Seat Pad and flip open (4a). Lift up on
bottom Backrest Seat Pad and move it out of the way (4b).
BOOSTER SEAT SETUP
3
4
BOOSTER SEAT SETUP
3
4a
4b
88
89
BOOSTER MODE
BOOSTER MODE
5
BOOSTER SEAT SETUP
6
Connect the Chest Clip together and slide it down to the buckle
tongues. Insert the Chest Clip and the buckle tongues into the
compartment at the bottom of the Seat Back.
Remove the Shoulder Pads and store them for later use.
5
BOOSTER SEAT SETUP
6
88
89
BOOSTER MODE
BOOSTER MODE
5
BOOSTER SEAT SETUP
6
Connect the Chest Clip together and slide it down to the buckle
tongues. Insert the Chest Clip and the buckle tongues into the
compartment at the bottom of the Seat Back.
Remove the Shoulder Pads and store them for later use.
5
BOOSTER SEAT SETUP
6
90
91
BOOSTER MODE
BOOSTER MODE
8
BOOSTER SEAT SETUP
7a
7c
7b
Remove the Crotch Strap Pad by pushing the fabric Tab through the
slot on the BACK of the Harness Buckle (7a). Then pull Tab out of the
FRONT (7b) and remove Crotch Strap Pad (7c).
Lift up on the Seat Bottom Pad, undo both elastic straps attached to
the Latch Storage compartment (Refer to pages 26-27 and complete
step 1). Thread the Crotch Strap through the slot in the seat pad and
pull forward on the Seat Bottom pad to locate the Crotch Strap
compartment.
7
BOOSTER SEAT SETUP
8
90
91
BOOSTER MODE
BOOSTER MODE
8
BOOSTER SEAT SETUP
7a
7c
7b
Remove the Crotch Strap Pad by pushing the fabric Tab through the
slot on the BACK of the Harness Buckle (7a). Then pull Tab out of the
FRONT (7b) and remove Crotch Strap Pad (7c).
Lift up on the Seat Bottom Pad, undo both elastic straps attached to
the Latch Storage compartment (Refer to pages 26-27 and complete
step 1). Thread the Crotch Strap through the slot in the seat pad and
pull forward on the Seat Bottom pad to locate the Crotch Strap
compartment.
7
BOOSTER SEAT SETUP
8
92
93
BOOSTER MODE
BOOSTER MODE
10
BOOSTER SEAT SETUP
9
9a
To store the Crotch Strap, fit the Crotch Strap buckle into the Crotch
Strap compartment, which is located next to the crotch strap
adjustment slots in the seat base (9a).
Repeat Booster Seat Setup Steps 2-4 (on pages 84-86) in REVERSE
to re-attach the Backrest Seat Pad.
9
BOOSTER SEAT SETUP
10
92
93
BOOSTER MODE
BOOSTER MODE
10
BOOSTER SEAT SETUP
9
9a
To store the Crotch Strap, fit the Crotch Strap buckle into the Crotch
Strap compartment, which is located next to the crotch strap
adjustment slots in the seat base (9a).
Repeat Booster Seat Setup Steps 2-4 (on pages 84-86) in REVERSE
to re-attach the Backrest Seat Pad.
9
BOOSTER SEAT SETUP
10
94
95
BOOSTER MODE
BOOSTER MODE
BOOSTER SEAT INSTALLATION
BOOSTER SEAT INSTALLATION
See page 35 for “Vehicle Seating Positions” before installing. Make sure
the vehicle is on a level surface, if possible.
Place the Booster Seat on the vehicle seat making sure the installation lines
(located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Booster Seat.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
2
1
3
LEVEL
SLO PE
3
Installation
Lines
Vehicle
Seating
Surface
2
94
95
BOOSTER MODE
BOOSTER MODE
BOOSTER SEAT INSTALLATION
BOOSTER SEAT INSTALLATION
See page 35 for “Vehicle Seating Positions” before installing. Make sure
the vehicle is on a level surface, if possible.
Place the Booster Seat on the vehicle seat making sure the installation lines
(located on the Seat Base) are PARALLEL with the vehicle seating
surface.
Check that the headrest of the vehicle seat does not interfere with the
Headrest of the Booster Seat.
If the vehicle headrest pushes the Child Restraint forward, check your
vehicle owner’s manual to see if the headrest removal is permitted. If so,
follow the vehicle owner’s manual to remove the headrest. If it is not
permitted, raise the vehicle headrest or move the Child Restraint to a
different vehicle seating location.
2
1
3
LEVEL
SLO PE
3
Installation
Lines
Vehicle
Seating
Surface
2
96
97
BOOSTER MODE
BOOSTER MODE
BOOSTER SEAT INSTALLATION
BOOSTER INSTALLATIONBOOSTER SEAT INSTALLATION
54
4
L E V EL
SLOPE
L E V EL
SLOPE
1
2
3
4
Make sure the Child Restraint is not blocking the vehicle belt buckle.
4
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, re-adjust the seat
recline to position 3 or 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
96
97
BOOSTER MODE
BOOSTER MODE
BOOSTER SEAT INSTALLATION
BOOSTER INSTALLATIONBOOSTER SEAT INSTALLATION
54
4
L E V EL
SLOPE
L E V EL
SLOPE
1
2
3
4
Make sure the Child Restraint is not blocking the vehicle belt buckle.
4
Installation on a Level Surface: Locate the Bubble Level Indicator
label and re-adjust the seat recline to any position that the Bubble
falls between the lines.
Installation on a Slope: If vehicle is on a slope, re-adjust the seat
recline to position 3 or 4 only.
L E V E L
SLO PE
L E V E L
SLO PE
98
99
BOOSTER MODE
BOOSTER MODE
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
“CLICK”
“CLICK”
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
7
6
5
BOOSTER SEAT INSTALLATION
If using LATCH, locate the LATCH Connector Storage compartment and
remove LATCH straps. Make sure SuperCinch
®
LATCH Tightener strap (Pull
2
nd
) and LATCH Adjuster strap (Pull 1
st
) are loosened to their full length.
See page 50-53
.
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars. Locate the Tether, attach to
Tether anchor bar, and pull tight.
Pull up on the end of the LATCH Adjuster strap (Pull 1
st
) until strap is tight.
Pull on the SuperCinch
®
LATCH Tightener strap (Pull 2
nd
) to
secure Child Restraint.
Use of LATCH and Top Tether in BOOSTER MODE is completely optional. If LATCH
and Tether is not used, make sure the LATCH and Tether Straps are properly stored.
See page 20.
5
6
7
BOOSTER SEAT INSTALLATION
If the seat is not secured with both the LATCH anchors and Top Tether, the seat
must be secured with the vehicle Lap-Shoulder belt when not in use.
98
99
BOOSTER MODE
BOOSTER MODE
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
“CLICK”
“CLICK”
PULL
1
st
2
nd
PULL
PULL
1
st
2
nd
PULL
7
6
5
BOOSTER SEAT INSTALLATION
If using LATCH, locate the LATCH Connector Storage compartment and
remove LATCH straps. Make sure SuperCinch
®
LATCH Tightener strap (Pull
2
nd
) and LATCH Adjuster strap (Pull 1
st
) are loosened to their full length.
See page 50-53
.
Locate the LATCH anchor bars in your vehicle. Attach both LATCH
Connectors to the vehicle LATCH anchor bars. Locate the Tether, attach to
Tether anchor bar, and pull tight.
Pull up on the end of the LATCH Adjuster strap (Pull 1
st
) until strap is tight.
Pull on the SuperCinch
®
LATCH Tightener strap (Pull 2
nd
) to
secure Child Restraint.
Use of LATCH and Top Tether in BOOSTER MODE is completely optional. If LATCH
and Tether is not used, make sure the LATCH and Tether Straps are properly stored.
See page 20.
5
6
7
BOOSTER SEAT INSTALLATION
If the seat is not secured with both the LATCH anchors and Top Tether, the seat
must be secured with the vehicle Lap-Shoulder belt when not in use.
100
101
BOOSTER MODE
BOOSTER MODE
SECURING CHILD IN BOOSTER SEAT
1
2
SECURING CHILD IN BOOSTER SEAT
Place the child into the Child Restraint, making sure the child is sitting
with his/her back against the Backrest.
The Shoulder Belt guide must be positioned at or just slightly above the
child’s shoulders. If not, adjust the Headrest to the proper height.
See
page 28 for adjusting the Headrest Height.
1
2
100
101
BOOSTER MODE
BOOSTER MODE
SECURING CHILD IN BOOSTER SEAT
1
2
SECURING CHILD IN BOOSTER SEAT
Place the child into the Child Restraint, making sure the child is sitting
with his/her back against the Backrest.
The Shoulder Belt guide must be positioned at or just slightly above the
child’s shoulders. If not, adjust the Headrest to the proper height.
See
page 28 for adjusting the Headrest Height.
1
2
102
103
BOOSTER MODE
BOOSTER MODE
43
SECURING CHILD IN BOOSTER SEAT
“CLICK”
Route the lap belt UNDER the 1st Armrest and across the child’s
thighs. Then route the shoulder belt and the lap belt UNDER the 2nd
Armrest closest to the vehicle buckle, as shown.
Buckle the vehicle belt.
3
4
SECURING CHILD IN BOOSTER SEAT
102
103
BOOSTER MODE
BOOSTER MODE
43
SECURING CHILD IN BOOSTER SEAT
“CLICK”
Route the lap belt UNDER the 1st Armrest and across the child’s
thighs. Then route the shoulder belt and the lap belt UNDER the 2nd
Armrest closest to the vehicle buckle, as shown.
Buckle the vehicle belt.
3
4
SECURING CHILD IN BOOSTER SEAT
104
105
BOOSTER MODE
BOOSTER MODE
5a
5c
SECURING CHILD IN BOOSTER SEAT
5b
Slide the shoulder belt between the Headrest and the side of the Seat
back (5a). Thread the shoulder belt through the orange Shoulder Belt
Guide (5b), located at the bottom of the headrest. Make sure the
Shoulder belt lays flat and is not twisted (5c).
5
The seat belt can remain in the Shoulder Belt Clip until the seat is removed
from the vehicle.
SECURING CHILD IN BOOSTER SEAT
6
Ensure the child is secured correctly, as shown.
6
Check that the shoulder belt is snug on the child’s shoulder and that it does
not rub on the neck. It should lie flat across the child’s chest and middle
of shoulder. The Shoulder Belt Guide should never be below the child’s
shoulder. If necessary, adjust the Child Restraint Headrest to achieve a
proper fit.
104
105
BOOSTER MODE
BOOSTER MODE
5a
5c
SECURING CHILD IN BOOSTER SEAT
5b
Slide the shoulder belt between the Headrest and the side of the Seat
back (5a). Thread the shoulder belt through the orange Shoulder Belt
Guide (5b), located at the bottom of the headrest. Make sure the
Shoulder belt lays flat and is not twisted (5c).
5
The seat belt can remain in the Shoulder Belt Clip until the seat is removed
from the vehicle.
SECURING CHILD IN BOOSTER SEAT
6
Ensure the child is secured correctly, as shown.
6
Check that the shoulder belt is snug on the child’s shoulder and that it does
not rub on the neck. It should lie flat across the child’s chest and middle
of shoulder. The Shoulder Belt Guide should never be below the child’s
shoulder. If necessary, adjust the Child Restraint Headrest to achieve a
proper fit.
106
107
BOOSTER MODE
BOOSTER MODE
CONVERT TO HARNESS MODE
CONVERT TO HARNESS MODE
To convert the Booster Mode back to Harness Mode. Lift the Zip-On Head
Rest Pad out of the way. Unzip the side of the Seat Pad and flip open. Lift
up on bottom Backrest Pad. (Refer to pages 84-86 and complete
steps 2-4)
Lift up on the Harness Straps and slide out the Chest Clips first, followed
by the Buckle tongues.
Lift up on the Seat Bottom Pad, undo both elastic straps attached to the
Latch Storage compartment (Refer to pages 26-27 and complete
step 1). Locate crotch strap and insert the Crotch Strap into the
appropriate opening in seat pad. Re-attach both elastic straps at back of
seat padding to LATCH compartment door. Make sure the Harness Straps
are arranged into the Seat Pad Grooves. Re-attach the Shoulder Pads and
crotch pad.
Redo the zipper on the lower Backrest Seat Pad section and replace
Zip-On Head Rest Pad. Follow steps on page 84-86 in REVERSE.
1
2
3
2
Seat Pad
Groove
Seat Pad
Groove
106
107
BOOSTER MODE
BOOSTER MODE
CONVERT TO HARNESS MODE
CONVERT TO HARNESS MODE
To convert the Booster Mode back to Harness Mode. Lift the Zip-On Head
Rest Pad out of the way. Unzip the side of the Seat Pad and flip open. Lift
up on bottom Backrest Pad. (Refer to pages 84-86 and complete
steps 2-4)
Lift up on the Harness Straps and slide out the Chest Clips first, followed
by the Buckle tongues.
Lift up on the Seat Bottom Pad, undo both elastic straps attached to the
Latch Storage compartment (Refer to pages 26-27 and complete
step 1). Locate crotch strap and insert the Crotch Strap into the
appropriate opening in seat pad. Re-attach both elastic straps at back of
seat padding to LATCH compartment door. Make sure the Harness Straps
are arranged into the Seat Pad Grooves. Re-attach the Shoulder Pads and
crotch pad.
Redo the zipper on the lower Backrest Seat Pad section and replace
Zip-On Head Rest Pad. Follow steps on page 84-86 in REVERSE.
1
2
3
2
Seat Pad
Groove
Seat Pad
Groove
108
109
BOOSTER MODE
BOOSTER MODE
SECURING CHILD CHECKLIST
Check that the seat belt is not twisted.
ALWAYS check to make sure vehicle seat belt is securely buckled. If buckle
separates, child could be killed or seriously injured.
DO NOT
use anything (pillows, blankets, etc.) between the Booster Seat and the vehicle
seat or between the child and the Booster Seat. Avoid bulky clothing that interferes with proper
seat belt placement. In the event of an accident, the Booster Seat may not operate correctly.
SECURING CHILD CHECKLIST
Slide the shoulder belt through the orange Shoulder Belt Guide.
Do not let your child slide forward or downward while in the Booster Seat.
Never use the vehicle belt in any position other than those indicated in this User Guide!
To avoid injury to others, ALWAYS secure this child restraint in BOOSTER
MODE when unoccupied. An unsecured Booster Seat could injure other
occupants in a sudden stop or crash.
Always secure the unoccupied BOOSTER SEAT with either LATCH system (see page 100) or
with the vehicle belt by following the “Securing Child in BOOSTER SEAT” instructions, see
page 104.
108
109
BOOSTER MODE
BOOSTER MODE
SECURING CHILD CHECKLIST
Check that the seat belt is not twisted.
ALWAYS check to make sure vehicle seat belt is securely buckled. If buckle
separates, child could be killed or seriously injured.
DO NOT
use anything (pillows, blankets, etc.) between the Booster Seat and the vehicle
seat or between the child and the Booster Seat. Avoid bulky clothing that interferes with proper
seat belt placement. In the event of an accident, the Booster Seat may not operate correctly.
SECURING CHILD CHECKLIST
Slide the shoulder belt through the orange Shoulder Belt Guide.
Do not let your child slide forward or downward while in the Booster Seat.
Never use the vehicle belt in any position other than those indicated in this User Guide!
To avoid injury to others, ALWAYS secure this child restraint in BOOSTER
MODE when unoccupied. An unsecured Booster Seat could injure other
occupants in a sudden stop or crash.
Always secure the unoccupied BOOSTER SEAT with either LATCH system (see page 100) or
with the vehicle belt by following the “Securing Child in BOOSTER SEAT” instructions, see
page 104.
ADDITIONAL INFORMATION
110
111
ADDITIONAL INFORMATION
INSTALLATION ON AN AIRCRAFTINSTALLATION ON AN AIRCRAFT
• This Child Restraint is certified for aircraft use, in HARNESS MODE ONLY.
Contact the airline prior to travel to discuss their Child Restraint policy.
• Use this Child Restraint only on FORWARD-FACING aircraft seats.
When traveling by airplane with your child, Chicco recommends taking
the Child Restraint on the airplane with you so that you can use it with
your child. Not only will it protect your child during take-off, landing, and
turbulence, it will also allow your child to be more comfortable.
• Install Child Restraint on an aircraft the same way it is installed in a vehicle
when using a vehicle lap belt. Reference Lap belt install in Harness Mode on
page 66.
This restraint is NOT certified for aircraft use in BOOSTER MODE.
Aircraft do not have lap-shoulder belts to secure your child.
ADDITIONAL INFORMATION
110
111
ADDITIONAL INFORMATION
INSTALLATION ON AN AIRCRAFTINSTALLATION ON AN AIRCRAFT
• This Child Restraint is certified for aircraft use, in HARNESS MODE ONLY.
Contact the airline prior to travel to discuss their Child Restraint policy.
• Use this Child Restraint only on FORWARD-FACING aircraft seats.
When traveling by airplane with your child, Chicco recommends taking
the Child Restraint on the airplane with you so that you can use it with
your child. Not only will it protect your child during take-off, landing, and
turbulence, it will also allow your child to be more comfortable.
• Install Child Restraint on an aircraft the same way it is installed in a vehicle
when using a vehicle lap belt. Reference Lap belt install in Harness Mode on
page 66.
This restraint is NOT certified for aircraft use in BOOSTER MODE.
Aircraft do not have lap-shoulder belts to secure your child.
ADDITIONAL INFORMATION
112
113
ADDITIONAL INFORMATION
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
• Cleaning Cup Holders:
Cup Holder is dishwasher safe on top rack only.
• Cleaning Harness:
DO NOT remove the Harness Straps, Chest Clip, and Chest
Clip pads. The Chest Clip Pads can be easily spot cleaned
with warm water and mild soap. Air dry.
• Cleaning LATCH and Adjuster Straps:
Sponge clean using warm water only. Air dry.
• Cleaning Buckle and LATCH Hardware:
Sponge clean, using warm water only. If debris is in buckle,
remove and rinse in warm cup of water only. Air dry.
DO NOT USE Child Restraint if any part of the harness is damaged. For
proper removal and installation of the harness straps visit the Chicco website
at www.chiccousa.com or call 1-877-424-4226.
DO NOT USE BLEACH, solvents or household cleaners as they may
weaken plastics and straps.
DO NOT USE SOAPS OR LUBRICANTS on Harness Adjuster Strap,
Buckle, and LATCH hardware. It may cause them to malfunction.
• Cleaning Softgoods:
Hand wash using mild soap and water, or machine wash in cold
water on delicate cycle using mild detergent. Hang to dry.
• Cleaning Shoulder Pads:
Hand wash using mild soap and water. Hang to dry.
• Cleaning Plastics:
Sponge clean using warm water and mild soap. Towel dry.
NEVER use Child Restraint without the seat pad.
Do NOT remove Adjuster straps. For additional information visit the Chicco
website at www.chiccousa.com or call 1-877-424-4226.
For softgood removal instructions visit the Chicco website at www.chiccousa.com
or call 1-877-424-4226.
ADDITIONAL INFORMATION
112
113
ADDITIONAL INFORMATION
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
• Cleaning Cup Holders:
Cup Holder is dishwasher safe on top rack only.
• Cleaning Harness:
DO NOT remove the Harness Straps, Chest Clip, and Chest
Clip pads. The Chest Clip Pads can be easily spot cleaned
with warm water and mild soap. Air dry.
• Cleaning LATCH and Adjuster Straps:
Sponge clean using warm water only. Air dry.
• Cleaning Buckle and LATCH Hardware:
Sponge clean, using warm water only. If debris is in buckle,
remove and rinse in warm cup of water only. Air dry.
DO NOT USE Child Restraint if any part of the harness is damaged. For
proper removal and installation of the harness straps visit the Chicco website
at www.chiccousa.com or call 1-877-424-4226.
DO NOT USE BLEACH, solvents or household cleaners as they may
weaken plastics and straps.
DO NOT USE SOAPS OR LUBRICANTS on Harness Adjuster Strap,
Buckle, and LATCH hardware. It may cause them to malfunction.
• Cleaning Softgoods:
Hand wash using mild soap and water, or machine wash in cold
water on delicate cycle using mild detergent. Hang to dry.
• Cleaning Shoulder Pads:
Hand wash using mild soap and water. Hang to dry.
• Cleaning Plastics:
Sponge clean using warm water and mild soap. Towel dry.
NEVER use Child Restraint without the seat pad.
Do NOT remove Adjuster straps. For additional information visit the Chicco
website at www.chiccousa.com or call 1-877-424-4226.
For softgood removal instructions visit the Chicco website at www.chiccousa.com
or call 1-877-424-4226.
