FAN CLEANING
• Always unplug the fan before cleaning or disassembling.
• Be sure to use a soft cloth moistened with a mild soap solution.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner,
benzene.
• It is recommended to periodically clean this fan by lightly running
a vacuum cleaner nozzle over the fan grill to remove any dust or
dirt that may have accumulated inside or on the unit.
WARRANTY INFORMATION
CLEANING / STORAGE
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Instruction Manual
Blizzard
®
Oscillation Table Fan
Item: 12081
Model: 32510134
Printed In China
1 YEAR LIMITED WARRANTY
This device has a limited warranty of 1 year from the
original date of purchase against workmanship and defects
in material. If under normal use, your product fails to
operate, please contact our customer service department at
[email protected]. A refund or replacement will be
provided to you with proof of purchase. Star Elite Inc. may
deny claims of damage caused by misuse or modications
of this product.
Warranty Service
Contact our customer service at
getholmesfans.com/en/contact-us
or info@getholmesfans.com or 1-866-769-3166
(8:30 am - 5:00 pm EST) Monday-Friday.
Our team will be happy to assist.
www.getholmesfans.com
For inquiries regarding recycling and proper disposal
of this product, please contact your local waste
management facility.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for
this table fan.
REPLACEABLE FUSE
If the (2.5 Amp, 125 Volt) replaceable fuse blows, please visit
our website at www.getholmesfans.com for information on how
to order a new fuse. Follow the user servicing instructions to
replace the fuse on the plug.
User Servicing Instructions
1. Unplug the fan. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover, located on the top of the plug, by using your
thumb or a flathead screwdriver to slide the cover down
towards the prongs.
NOTE: Ensure that fuse cover
is completely open before
attempting to remove fuse.
3. Remove fuse carefully by using
a small screwdriver to pry the
fuse out of the compartment
by the metal ends of the fuse.
(see Figure 3)
4. Place plug on a solid, flat
surface. Insert new 2.5 Amp, 125 Volt fuse into fuse
compartment and use a small screwdriver to secure the
metal ends of the fuse into the compartment.
CAUTION: Risk of fire. Replace fuse only with 2.5 Amp,
125 Volt fuse.
5. Slide fuse cover closed completely. If fuse cover is difficult to
close, make sure fuse is secured in place completely by
pressing down on metal ends of the fuse.
6. Risk of fire. Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed. Discard
product if the attachment plug is damaged.
Figure 3
Fuse
Metal ends
Fuse cover
FAN STORAGE
This fan can be stored in the off-season in the original (or
appropriately sized) box. It is important to keep it in a safe,
dry location.
Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
SEH021-092022
© 2022 Sunbeam Products, Inc. All rights reserved.
HOLMES
®
and BLIZZARD
®
are registered trademarks of
Sunbeam Products, Inc. used under license.
Loading ...
Loading ...
Loading ...
