Loading ...
Loading ...
Loading ...
— 18 —
Installation
STEP 12
Install Filters
To install lters, follow four steps below (see gure #23):
•Angle the lter into slots at the back of the hood.
•Push the button on handle of the lter.
•Release the handle once the lter ts into a resting position.
•Repeat to install all lters.
Cleaning Filters
IMPORTANT: Drain oil from spacers, filters, oil tunnels, oil containers before oil and residue overflow!
•Remove all spacers, lters, grease tray, and oil containers and discard oil and residue.
•Wash with warm soapy water. NOTE: Stainless steel lters, spacers and oil tunnel are top rack dishwasher safe.
•Dry thoroughly before replacing and follow directions for installation in reverse.
•Filters should be cleaned after every 30 hours of use.
•Should lters wear out due to age and prolonged use, replace with a new lter.
Figure #23
Loading ...
Loading ...
Loading ...