Loading ...
Loading ...
Loading ...
— 15 —
STEP 10
Installing the Hood
Method 1: Attaching the unit to the wall
•Remove eight screws (4 × 8 mm) holding cover pan to hood, see Figure #13 and #14.
•Mark or drill four small holes on the mounting position according to the dimensions on Figure #15.
•Insert four drywall anchors into the holes, and two screws into the top holes.
•Hang the range hood onto the screws.
•Open the lter and install the inner panel in place with safety screws. See Figure #16.
•Attach the ducting to the damper and exhaust outdoors.
•Re-assemble the cover pan, put the metal inlet cover onto the hood with four screws (4 × 8 mm) (Figure #17).
Installation
Figure #16
Figure #13 Figure #14
Figure #17
30 inch 36 inch
Safety screw holes
Figure #15
Loading ...
Loading ...
Loading ...