Loading ...
Loading ...
Loading ...
4. Slide the cartridge cap onto the new cartridge as shown
5, With cartridge cap in the vertical position, push the new filter
cartridge into the base grille until it stops., Rotate the cartridge
cap clockwise to a horizontal position
6. RUN WATER THROUGH THE DISPENSER UNTILTHE
WATER RUNS CLEAR (about 2 to 3 gallons or 6 to 7 minutes),
This will clean the system and clear air from the lines,,
Additional flushing may be required in some households,
NOTE: As air is cleared from the system, water may spurt out
of the dispenser,
Using the dispenser without the water filter
You can run the dispenser without a water filter cartridge Your
water will not be filtered° If you run the dispenser without a water
filter cartridge, keep the cartridge cap and replace it in the base
grille for future use.
1. Remove the water filter cartridge (See "Changing a water
filter cartridge" earlier in this section) Then slide the cartridge
cap off the end of the filter cartridge DO NOT DISCARD THE
CAP.
2. With the cartridge cap in the vertical position, insert the cap
into the base grille until it stops.
3o Rotate the cartridge cap to a horizontal position.
NOTE: The cartridge cap may not be even with the base
grille,
1
[ _ ,; 5, :_..................
Ordering replacement filters
To purchase more water fitter cartridges visit your local SEARS
store, To order by phone in the United States, call
1-800-366-PAR'E In Canada, call 1-800-488-1222, When
replacing your factory-installed water filter, ask for part accessory
Part No #9902
The shetves in your refrigerator are adjustable to meet your
individual storage needs Your model may have glass or wire
shelves_
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items witl make
finding the exact item you want easier, It witt also reduce the
amount of tim&the refrigerator door is open, and save energy
IMPORTANT: Do not clean glass shelves with warm water when
they are cold, Shelves may break if exposed to sudden
temperature changes or impact, such as bumping, For your
protection tempered glass is designed to shatter into many small
pebble-size pieces. This is normal,
NOTE: Glass shelves are heavy. Use special care when removing
them to avoid impact from dropping
To remove shelves from the shipping position (shelves are
shipped upside down):
1. Grasp front of upper shelf with one hand and use other hand
to remove packing material from shelf area.
2. Lower front of upper shelf until shelf hooks can be removed
from slots in shelf supports on the back refrigerator wall. Pull
shelf forward to remove,
3. Ftip shelf over
4. Insert rear shelf hooks into slots in shelf supports.
5. Tilt front of shelf up untit rear hooks drop into stots.,
6. Lower front of shelf Check to make sure that shelf is securely
in position.
Slide-out Shelves (on some models}
Some shelves slide out, providing easier access to foods stored
in back
To slide out shelf, carefully pull front of shelf toward you.
To slide in shelf, push shelf in until it stops.
To remove a shelf from the metal frame:
1, Pull shelf out to the stop
2, Tilt front of the shelf up and pu!l it out a tittle farther.
3. Lift up shetf so that it moves through the slot in the frame,
Replace the shelf in the reverse order,
14
Loading ...
Loading ...
Loading ...