Loading ...
Loading ...
Loading ...
5WWW.SENIXTOOLS.COM
OPERATION
OPERATION
ATTACH /REMOVE THE BATTERY
CAUTION: Only use a Senix-approved battery
and charger.
Note: The battery is not fully charged at the time of
purchase. Charge it fully before using it for the
rst time.
To insert the battery, slide it into the back of the unit until a
“click” is heard. Make sure the battery is fully inserted and
latched into position.
To remove the battery, press the release button and slide
the battery out.
WARNING — Do not insert or remove the battery while
the trigger is pressed or while the unit is
in motion.
PREPARING THE HEDGE TRIMMER
Before starting the hedge trimmer, check that the trigger
switches and safety switches are moving freely, returning
automatically and quickly upon release. Also check that the
cooling air vents are not obstructed and that both the front
and rear handles are clean and dry.
STARTING THE HEDGE TRIMMER
The hedge trimmer is equipped with a two-handed safety
switch. In order to power the machine on, you must press
both the front handle’s safety switch and the rear handle’s
trigger switch simultaneously. Always hold the hedge
trimmer with both hands during operation.
TRIMMING HEDGES
A hedge trimmer is primarily used to cut hedges, but can
also be used on shrubs and bushes as well. For the best
results, angle the blade of the hedge trimmer 15° from the
targeted hedge.
A string or tie can be used as a guideline in order to create
a level hedge. Position the string at the preferred height
and cut everything that protrudes past it.
The unit can be used in either direction. Use a sweeping
motion back and forth for even cuts. Avoid cutting limbs
and branches larger than 2/3 of an inch.
Do not force the hedge trimmer through heavy shrubbery.
If the blades become jammed, immediately release the
trigger and remove the battery pack.
Always be careful of ying debris during operation. Wear
gloves when trimming thorny or prickly foliage.
!
!
Loading ...
Loading ...
Loading ...