Loading ...
Loading ...
Loading ...
N(1)
2 3
GB
29
Installation of indoor unit
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3. Remove the wire clip; connect the power
connection wire to the wiring terminal
according to the color; tighten the screw
and then fix the power connection wire
with wire clip.
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
NOTE:
• All wires of indoor unit and outdoor unit should be connected by a professional.
• If the length of power connection wire is insufficient, please contact the supplier for a new
one. Avoid extending the wire by yourself.
• For the air conditioner with plug, the plug should be reachable after finishing installation.
• For the air conditioner without plug, an air switch must be installed in the line. The air
switch should be all-pole parting and the contact parting distance should be more than
3mm.
NOTE: The wiring board is for reference only.
Please refer to the actual one.
cable-cross
hole
power connection wire
09, 12K, 17K, 21K Heat pump type:
Outdoor unit connection
blue black brown yellow-
green
Loading ...
Loading ...
Loading ...