Loading ...
Loading ...
Loading ...
Troubleshooting.
PROBLEM
The appliance won’t operate,
and the Indicator light is not
turning on.
SOLUTION
Unplugged: Make sure the
appliance is plugged into a
power source. When the power
is connected, the appliance will
beep once, and the Indicator
light will illuminate blue.
PROBLEM
The appliance won’t operate,
and the Indicator light is on.
SOLUTIONS
Work Bowl not properly
positioned: Make sure the
Work Bowl is installed in the
proper position on top of the
Motor Base.
Work Bowl Lid open or not fully
closed: Make sure the Work
Bowl Lid is properly positioned
atop the Work Bowl, fully closed,
and tightly sealed.
Water level low: Make sure
the Water Reservoir contains
enough water. Fill with room-
temperature water.
PROBLEM
The Steam setting cannot
be activated (appliance
does not steam or doesn’t
produce steam).
SOLUTIONS
Work Bowl not properly
positioned: Make sure the
Work Bowl is installed in the
proper position on top of the
Motor Base.
If it is not correctly installed, the
appliance will beep 6 times to
indicate all settings cannot
be activated.
Water level low: Make sure
the Water Reservoir has
enough water. Fill with room-
temperature water.
PROBLEM
The Blend setting cannot be
activated (appliance does
not blend).
SOLUTION
Work Bowl not properly
positioned: Make sure the
Work Bowl is installed in the
proper position on top of the
Motor Base.
If it is not correctly installed,
the appliance will beep 6 times
to indicate the Blend setting
cannot be activated.
PROBLEM
My appliance was working but
has now stopped.
SOLUTION
The Work Bowl Lid may have
opened: The appliance will stop
working if the Work Bowl Lid is
opened during operation.
Close the Work Bowl Lid and
press the Power button again to
resume operation.
PROBLEM
My appliance was working but
has now stopped. The Work Bowl
and Work Bowl Lid are both
positioned properly.
SOLUTION
The water level likely got too
low: If the water level in the
Water Reservoir gets too low
during operation, the appliance
will stop working.
The appliance will alert you that
your water level is too low by
FAQ.
What are the primary parts
that are included with this
appliance?
• Water Reservoir, Water
Reservoir Cap
• Work Bowl with integrated
handle, Work Bowl Lid
• Motor Base, Blending Blade,
Blade Holder
How many blending speeds
does the nutribullet Baby
®
Steam + Blend have? Is there
a Pulse setting?
The nutribullet Baby
®
Steam +
Blend has one blending speed.
However, there are two ways
to blend with the nutribullet
Baby
®
Steam + Blend.
Activate standard Blend mode
by setting the dial to Blend,
then pressing the Power
button. You can either allow the
blender to run its full 1-minute
Blend cycle, or press the Power
button at any time to stop
blending.
You can also change the
blend setting so it will Pulse
ingredients by turning the
Setting Dial to Blend and
pressing the Power button
for roughly 3 seconds. Once
in Pulse mode, simply press
and release the Power button
in quick succession until
food reaches the desired
consistency. This is helpful for
creating more textured purées.
beeping 3 times and flashing
the blue Indicator light.
Add room-temperature water
to the Water Reservoir, then
press the Power button to
resume operation.
After the appliance is refilled
with enough water, the blue
Indicator light will illuminate
solidly. Resume operation by
pressing the Power button.
2928
Loading ...
Loading ...
Loading ...