Loading ...
Loading ...
Loading ...
1 Turn the Setting Dial to
select the Steam + Blend
setting and press the Power
button. The Indicator light
will flash blue throughout
the steaming process to
indicate normal operation.
NOTE: The appliance will stop
working if the Work Bowl Lid is
opened during operation. Close the
Work Bowl Lid and press the Power
button to resume operation.
NOTE: If the water level gets too
low during steaming, the appliance
will beep three times and the blue
Indicator light will flash. If this
occurs, turn the appliance o and
refill the Water Reservoir to the
required level. The Indicator light
will appear a solid blue when the
Water Reservoir is properly filled.
Press the Power button to resume
steaming operation.
STEAM + BLEND SETTING:
2 After steaming is complete,
the appliance will
automatically enter into
Blending mode.
3 When the Blend Cycle is
complete, the appliance will
beep 5 times, then enter
Standby mode.
WARNING! The surfaces
of the nutribullet Baby
®
Steam + Blend get hot
during use. Allow the
unit and food to
completely cool before
handling to reduce risk of
burns and scalds.
Steam Auto
Blend Pulse
Steam Auto
Blend Pulse
Steam Auto
Blend Pulse
increased 125% +125 Turn the setting dial to select the steam setting
1 To enter Pulse mode, turn
the Setting Dial to the Blend
setting, then push and
hold the Power button for
3 seconds, until the
appliance beeps 3 times.
2 Push and hold the Power
button to blend, and release
it to stop blending. Repeat
as desired.
3 Exiting Pulse mode:
The Steam + Blend will go
back to regular Blend mode
if no action is taken after
60 seconds or with any
interrupting actions such
as rotating the dial or
removing the Work Bowl.
PULSE BLEND SETTING:
Steam Auto
Blend Pulse
increased 125% +125 Turn the setting dial to select the steam setting
Steam Auto
Blend Pulse
increased 125% +125 Turn the setting dial to select the steam setting
Steam Auto
Blend Pulse
increased 125% +125
2322
Loading ...
Loading ...
Loading ...