Using Your Purifier
Filter Replacement
On/Off
Turn on/Standby mode.
UVC Lamp
Tap to turn on/off the UV lamp.
Fan Speed
Tap repeatedly to cycle through Low (I)/Medium (II)/High (III).
Sleep/Reset
· Tap to activate sleep mode (sleep LED on, low speed).
· This indicator flashes when the filter shall be replaced.
Auto-off Timer
· Tap repeatedly to cycle through 2H -> 4H -> 8H.
· Hold the button to cancel the preset timer.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
1. Open the front cover from the top.
2. Remove the filter by pulling the two tabs.
3. Insert the new filter, consult the tabs for correct installing direction.
4. Reattach the front cover and latch into place securely.
5. Plug in and tap ON/OFF to turn on, and hold RESET to reset the filter.
RESET
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
www.parisrhone.co
Rev_1.0_EN
MADE IN CHINA
Intertek
5015014
CM
Using Your Purifier
Filter Replacement
On/Off
Turn on/Standby mode.
UVC Lamp
Tap to turn on/off the UV lamp.
Fan Speed
Tap repeatedly to cycle through Low (I)/Medium (II)/High (III).
Sleep/Reset
· Tap to activate sleep mode (sleep LED on, low speed).
· This indicator flashes when the filter shall be replaced.
Auto-off Timer
· Tap repeatedly to cycle through 2H -> 4H -> 8H.
· Hold the button to cancel the preset timer.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling. Business users should contact
their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
1. Open the front cover from the top.
2. Remove the filter by pulling the two tabs.
3. Insert the new filter, consult the tabs for correct installing direction.
4. Reattach the front cover and latch into place securely.
5. Plug in and tap ON/OFF to turn on, and hold RESET to reset the filter.
RESET
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
www.parisrhone.co
Rev_1.0_EN
MADE IN CHINA
Intertek
5015014
CM
