Loading ...
Loading ...
Loading ...
IV
●
Do not dismantle the Camera. The internal components can only be repaired by a qualified
professional. Dismantling it without professional assistance might cause water seeping in or
might result in the Camera producing poor quality images.
●
Operating temperature: –20 °C to +50 °C (–4 °F to +122 °F), and the operating humidity shall be
95% or less.
Maintenance and Repair Requirements
●
Prevent liquid from flowing into the Camera to avoid damage to the internal components. In
case the liquid enters the Camera, immediately stop using the Camera, cut off the power, and
disconnect all the cables, and then contact your local customer service center.
●
Use the accessories regulated by the manufacturer. The Camera should be maintained by
qualified professionals.
●
Make sure to cut off the power before cleaning the Camera, to prevent electric shock.
If the Camera malfunctions, contact your local customer service center. Do not dismantle the
Camera.
●
Clean the Camera body with a piece of soft dry cloth. For any dirt that is hard to remove, pick up a
piece of clean and soft cloth, dip it into a little neutral detergent and gently wipe the dust away.
After that, wipe away all the remaining liquid on the Camera with another dry cloth. Never use
volatile solvents such as alcohol, benzene and thinner, or cleaners that are strong and abrasive.
Otherwise, the Camera’s surface coating will be damaged and its working performance will be
encumbered.
●
Save the factory package of the Camera. When the Camera malfunctions, pack the Camera with
the factory package and send to the dealer.
Loading ...
Loading ...
Loading ...