Loading ...
Loading ...
Loading ...
13
Step 4 Set the auto suspend time.
1. Press to select
Auto Suspend
.
2. Press to go to the
Auto Suspend
configuration screen.
3. Press to select the auto suspend time.
●
Off: Disable auto suspend.
●
1 Min, 3 Min, 5 Min, 10 Min: If there is no operation in the configured time, the
Camera will automatically suspend.
Step 5 Press to save the configuration.
When the Camera is in suspend mode, press the power button to weak up it.
3.2.12 Auto Shutdown
Step 1 On the main menu, press or to select
Auto Shutdown
.
Step 2 Press to go to the
Auto Shutdown
configuration screen.
Step 3 Press to set the auto shutdown time.
●
Off: Disable the auto shutdown.
●
1 Min, 3 Min, 10 Min, 30 Min: The Camera will automatically shut down in the
configured time.
Step 4 Press to save the configuration.
After finishing the auto shutdown settings, the Camera will suspend first, and then shut
down.
3.2.13 Setting DPC
After enabling DPC (Defective Pixels Correction), you can correct the defective pixels in the image.
Step 1 On the main menu, press or to select .
Step 2 Press to go to the
DPC
configuration screen.
Step 3 Press to set DPC.
●
Auto: The Camera automatically corrects the defective pixels in the image.
1. Select
Auto
.
2. Press to start the auto correction.
3. Follow the screen instructions to close the lens cover.
4. Press to save the configurations.
●
Manual: You need to correct the defective pixels manually.
1. Press to select X-axis and Y-axis.
2. Press and hold or to calibrate the defective pixels.
3. Press and hold to save the configuration.
The center of the cursor is the position of the defective pixel.
●
Restore: The DPC configuration is restored to the primary state.
Loading ...
Loading ...
Loading ...