Loading ...
Loading ...
Loading ...
9
Do not attempt to unclog the tines by dropping or
tapping the tool on the ground. This can damage the unit.
Remove and clean any debris from the outside of the cultivator and
inside of shroud before storage. See section.
Do not store the tool on or adjacent to fertilizers or chemicals.
Such storage can cause rapid corrosion.
Fertilizers and other garden chemicals contain agents that greatly
accelerate the corrosion of metals. If you use the tool in areas where
fertilizers or chemicals have been used, the tool should be cleaned
immediately afterwards. Wipe all exposed parts with a damp cloth. You
may lubricate only metal parts with a light petroleum based oil. When
cleaning, DO NOT immerse tool in water or spray it with a hose.
Replacement tines (RT400) for use with your tool are available from
your local dealer or authorized service center. If you need assistance
regarding accessories, please call: 1-800-544-6986.
The use of any accessory not recommended for use
with this tool could be hazardous.
Use only mild soap and damp cloth to clean the tool. Never let any
repairs, maintenance and adjustment (other than those listed in this
manual) should be performed by authorized service centers or other
parts.
Fertilizers and other garden chemicals contain agents which greatly
accelerate the corrosion of metals. Do not store the tool on or
adjacent to fertilizers or chemicals.
With the battery removed, use only mild soap and a damp cloth to
For assistance with your product, visit our website
for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
Tool will not
start.
Battery will not
charge.
Battery not
installed properly.
Battery not
charged.
Lock-out button not
actuated.
Battery not inserted
into charger.
Check battery installation.
Check battery charging
Pull back on lock button/
actuate trigger.
Insert battery into charger
until green LED appears.
Charge up to 8 hours if
battery totally drained.
Loading ...
Loading ...
Loading ...