Booster PAC ES5000 User’s Manual

Loading ...

Question: I have a regular 10 amp battery charger, can I use it to recharge the

Booster PAC?

Answer: No, only the supplied wall charger should be used.

Question: Is the Booster PAC goof proof?

Answer: No, jump starting instructions must be followed. Read and understand

all safety and operating instructions in this manual and those found in

theowner’smanualofanyvehiclebeingjumpstartedbeforeusingyour

Booster PAC.

Question: I’mrechargingmyBoosterPAC.ShouldthegreenCHARGECOMPLETE

light immediately come on?

Answer: No. First the yellow CHARGING light will come on to indicate the

charging process is beginning. Then, the red POWER LEVEL lights

come on in sequence as the level of charge increases. Finally, the green

CHARGE COMPLETE light will come on, but only when the Booster PAC

approaches full charge.

Question: How long should I charge the Booster PAC?

Answer: It should be charged for a minimum of 30 hours when new. Your Booster

PAC can be left on the wall charger continuously. When recharging with

the wall charger, the Booster PAC should be charged for 4 to 6 hours per

light that remains unlit when the TEST button is pressed.

Question: How do I know when the Booster PAC is fully charged?

Answer: Follow all charging instructions. Remove the Booster PAC from the wall

charger and press the TEST button. If all power indicator lights come on,

it is fully charged.

Question: How can I test the battery in my Booster PAC to see if it needs to be

replaced?

Answer: We recommend that you use a 100 amp battery load tester. Load the

Booster PAC battery for 6 seconds with a 100 amp load and it should

maintain at least 9 Vdc.

Loading ...

Booster PAC ES5000 1500 Peak Amp 12V Jump Starter With Power Supply