Loading ...
Loading ...
Loading ...
A
WARNING: Before cleaning or performing any maintenance, make sure that
the belt sander has been disconnected from the power source.
,_ WARNING: Always wear safety goggles or safety glasses with side shields
when using compressed air to clean the tool. If the operation is dusty, also wear
a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged
by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. Keep all
ventilation openings clean.
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which may result in serious
personal injury.
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
CLEANING THE DUST
BOX (Fig. 10)
For more efficient operation,
empty the dust box when it is
no more than half full. This will
permit the air to flow through the
box better. Always empty and
clean the dust box thoroughly
when you've finished sanding and
before you store the sander.
To empty the dust box
Fig. 10
Upper cover
Filter
_J__Dust box
1. Disconnect the belt sander from the power source.
2. Remove the dust box from the sander and shake out the dust.
3. For a more thorough cleaning of the dust box, open the cover on top of the
dust box and remove the filter.
4. Gently tap the dust box and the cover to empty them.
5. Use a soft brush to clean the filter.
NOTICE: The filter cannot be rinsed with water.
i8
Loading ...
Loading ...
Loading ...