Loading ...
Loading ...
Loading ...
THE LIVE=TOOL
iNDiCATOR LIGHT
The belt sander is equipped with a
live=tool indicator light (Fig° 8).
When the tool is plugged into
an electrical supply, the
Rive=tool indicator Bight will
illuminate green to remind you
that the tool is plugged ino
When the tool is unplugged, the
indicator Bight will turn off.
=Fig. 8
Live-tool indicator light
SELECTING THE RIGHT SANDING BELT
Different sanding belt grits may be purchased from the store where you
purchased the tool.
Available grits are: Coarse, Medium and Fine.
Use a coarse grit to sand down rough finishes, medium grit to smooth the work
and fine grit to finish off.
It is best to make a trial run on a scrap piece of material to determine the best
grits for a particular job.
SANDING
This sander can be used for sanding operations on materials such as wood,
plastic, metal and painted surfaces. Do not use the sander for wet sanding.
_, WARNING: Finish sanding can produce clouds of fine sanding dust that
could ignite in the presence of sparks or an open flame. To avoid injury, always
use your sander in a well-ventilated area, away from sparks and flames.
_, WARNING: Before sanding, make sure that the sanding belt is securely
installed in place.
1. Secure the workpiece with clamps or other means to keep it from moving
while sanding.
2. Do not force the tool. Excessive pressure will overload the motor, causing
possible damage from motor overheating, and can result in inferior work.
3. Do not allow sanding on one spot too long, as the sander's rapid action may
remove too much material and make the surface uneven.
16
Loading ...
Loading ...
Loading ...