Loading ...
Loading ...
Loading ...
- 9 -
STEP 5: Attach Hydraulic Hoses, Storage Tube, Log Cradles and
Fenders
1.
Put O ring Ø14x2.5
(#19) on the gear pump outlet connector (#23), attach the hydraulic hose
(#16) to the gear pump outlet connector (#23).
2. Put O ring Ø17x2.5 (#71) on the external filter connector (#50), attach the hydraulic hose (#7)
to the connector (#50).
3. Remove the hex bolt M6x90 (#55), large flat washer Ø6 (#59) and nylon lock nut M6 (#60)
from the tow bar. Attach the Storage Tube (#82) using the hex bolt M6x90 (#55), large flat
washer Ø6 (#59) and nylon lock nut M6 (#60).
4. Attach the log cradle (#67) to the beam using hex bolt M12x35 (#83), flat washer Ø12 (#65)
and nylon lock nut M12 (#13).
5. Attach the fenders (#86 & #87) to the hydraulic reservoir using hex bolt M8x25 (#34), flat
washer Ø8 (#36), lock washer Ø8 (#32) and nylon lock nut M8 (#31).
Note: Please put rubber washers (#1) between fenders and hydraulic reservoir.
6. Remove the spring cotter pin and the retaining pin from the control valve. Rotate the control
lever to the vertical position and secure with the retaining pin and the spring cotter pin.
Loading ...
Loading ...
Loading ...