Loading ...
2
Operating Instructions and Parts Manual 24883/24884
24"/30" OSCILLATING WALL FAN
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your fan. Read this manual carefully. Learn the fan’s
applications and limitations, as well as, potential hazards
specific to it.
2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.
3. Keep children away. All children should be kept away from
the work area. Never let a child handle a fan without strict
adult supervision.
4. .DO NOT operate this fan if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if
your judgment or reflexes are impaired while taking drugs. If
there is any doubt, DO NOT attempt to operate.
5. Use safety equipment. Eye protection should be worn at all times
when operating this fan. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-
skid safety shoes, hard hat or hearing protection should be used
in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard
when operating this fan. Keep all apparel clear of the fan.
7. Don’t overreach. Keep proper footing and balance at all times
when operating this fan.
8. Check for damage. Check your fan regularly. If part of the fan
is damaged it should be carefully inspected to make sure
that it can perform its intended function correctly. If in doubt,
the part should be repaired. Refer all servicing to a qualified
technician. Consult your dealer for advice.
9. Keep away from flammables. DO NOT attempt to operate
this fan near flammable materials or combustibles. Failure to
comply may cause serious injury or death.
10. Store idle fans out of the reach of children and
untrained persons. Fans may be dangerous in the hands
of untrained users.
11. Maintain fan with care.
12. Keep fan dry and clean.
13. .DO NOT use a damaged fan. Tag damaged fan “DO NOT use”
until repaired.
14. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one tool may become hazardous when used on
another fan.
15. Fan service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury.
16. When servicing a fan, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of injury.
17. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. DO NOT use this
product in a damp or wet location.
18. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact
OEMTOOLS
®
for a replacement.
IMPORTANT SAFETY INSTRUCTIONS
The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that
may occur. The operator must understand that common sense
and caution are factors which cannot be built into this product, but
must be supplied by the operator.
DISPOSAL
At the end of the useful life of the OEMTOOLS
®
24" (24883) / 30"
(24884) Oscillating Wall Fan, dispose of the components according
to all state, federal and local regulations.
PURPOSE
The OEMTOOLS
®
24" (24883) / 30" (24884) Oscillating Wall Fan
helps circulate the air and keep it in motion while maintaining
a fresh breeze. It also helps prevent the inhalation of dangerous
gasses and fumes by adding ventilation.
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS.
WARNING
1. Unplug the fan before moving it or performing maintenance.
2. DO NOT touch the fan when your hands are wet.
3. Those who are not qualified electricians should not
disassemble, repair or rebuild the fan.
4. Unplug the fan when it is not in use.
5. DO NOT unplug the Oscillating Wall Fan by pulling on the
cable cord. Unplug by pulling the plug.
6. Avoid the use of extension cords when possible. Ensure that
they are UL listed if they must be used. DO NOT use a single
extension cord to operate more than one fan. DO NOT plug
the Oscillating Wall Fan into any other cord-connected device
(power strip, surge protector, multiple outlet adapters etc.).
7. DO NOT use the fan close to any fire or heat source.
8. DO NOT insert your hand or other objects into the guard or
the movable parts.
9. To reduce the risk of fire or electric shock, DO NOT use this
fan with any solid-state speed control device.
11/16
2016 OEMTOOLS
®
Size:
24" (24883) / 30" (24884)
Weight:
27 Lbs. (24883) / 34 Lbs. (24884)
Voltage:
120V/60Hz
Current:
2.0 Amp (24883) / 2.4 Amp (24884)
PRODUCT SPECIFICATIONS
Loading ...
Loading ...
Loading ...