Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Rust stains have formed on the
dishes.
Stainless-steel quality of the dishes is
insufficient.
Use only dishwasher-proof sets.
High level of salt in wash water.
Adjust the water hardness level using
the water hardness table.
Salt compartment cap not closed
properly.
Check that the salt compartment cap
is closed properly.
Too much salt spilled in the
dishwasher while filling it with salt.
Use funnel while filling compartment
with salt to avoid spillage.
Poor mains grounding.
Consult a qualified electrician
immediately.
Detergent remains in the detergent
compartment.
Detergent was added when the
detergent compartment was wet.
Make sure detergent compartment is
dry before use.
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
FAULT CODE POSSIBLE FAULT WHAT TO DO
FF
Water inlet system failure
Make sure the water inlet tap is open
and water is flowing.
Separate the inlet hose from the tap
and clean the hose filter.
Contact service if the error continues.
F5
Pressure system failure
Contact service.
F3
Continuous water input Close the tap and contact service.
F2
Inability to discharge water
Water discharge hose and filters may
be clogged.
Cancel the program.
If the error continues, contact service.
F8 Heater error Contact service.
F1 Overflow
Unplug the machine and close the tap.
Contact service.
FE
Faulty electronic card
Contact service.
F7
Overheating
Contact service.
F9
Divisor position error
Contact service.
F6
Faulty heater sensor
Contact service.
HI
High voltage failure
Contact service.
42
Loading ...
Loading ...
Loading ...