Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
The program does not start.
Your dishwasher is not plugged in. Plug your dishwasher in.
Your dishwasher is not switched on.
Switch your dishwasher on by
pressing the On/Off key.
Fuse blown.
Check your indoor fuses.
Water inlet tap is closed. Turn on the water inlet tap.
Your dishwasher door is open.
Close the dishwasher door.
Water inlet hose and machine filters
are clogged.
Check the water inlet hose and
machine filters and make sure they
are not clogged.
Water remains inside the machine.
Water drain hose is clogged or
twisted.
Check the drain hose, then either
clean or untwist it.
The filters are clogged.
Clean the filters.
The program is not finished yet. Wait until the program is finished.
Machine stops during washing.
Power failure.
Check mains power.
Water inlet failure.
Check water tap.
Shaking and bumping noises are
heard during a wash cycle.
The spray arm is hitting the dishes in
the lower basket.
Move or remove items blocking the
spray arm.
Food waste partially left on the dishes.
Dishes placed incorrectly, sprayed
water not reaching affected dishes.
Do not overload baskets.
Dishes leaning against each another.
Place dishes as instructed in the
section on loading your dishwasher.
Not enough detergent used.
Use the correct amount of detergent,
as instructed in the program table.
Wrong wash program selected.
Use the information in the program
table to select the most appropriate
program.
Spray arms clogged with food waste.
Clean the holes in the spray arms with
thin objects.
Filters or water drain pump clogged or
filter misplaced.
Check that the drain hose and filters
are correctly fitted.
There are whitish stains left on the
dishes.
Not enough detergent used.
Use the correct amount of detergent,
as instructed in the program table.
Rinse-aid dosage and/or water
softener setting set too low.
Increase rinse-aid and/or water
softener level.
High water hardness level.
Increase water softener level and add
salt.
Salt compartment cap not closed
properly.
Check that the salt compartment cap
is closed properly.
Dishes do not dry.
Drying option is not selected. Select a program with a drying option.
Rinse-aid dosage set too low. Increase rinse-aid dosage setting.
41
Loading ...
Loading ...
Loading ...